datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ISL6232CAZA View Datasheet(PDF) - Intersil

Part Name
Description
View to exact match
ISL6232CAZA Datasheet PDF : 25 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
®
Data Sheet
April 18, 2005
ISL6232
FN9116.0
High Efficiency System Power Supply
Controller for Notebook Computers
The ISL6232 is a high efficiency, quad output controller
optimized for converting battery, wall adapter or network DC
input voltage into system supply voltages required for
portable applications. The ISL6232 includes two PWM
controllers generating 0.8V to 5.5V, or fixed 5V and 3.3V
outputs. It also features 5V and 3.3V always linear regulators
with up to 100mA output current.
ISL6232 uses constant frequency current mode PWM
control with out of phase operation for reducing the input
ripple current and the ESR requirement of the input
capacitors. Over 95% efficiency is achieved through
synchronous rectification and dual PWM/Skip mode
architecture. High light load efficiency with skip mode
extends the battery life in system standby or shutdown
mode. The 5V and 3.3V always linear regulators take their
inputs from battery or ac adapter; and, to further improve
efficiency, their outputs are switched to the 5V or 3.3V
outputs from switching regulators when 5V or 3.3V is
available. Ultrasonic pulse skipping mode maintains
switching frequency above 25kHz to eliminate the audio
noise for high light load efficiency, and fixed frequency PWM
operation mode reduces the RF interference in sensitive
applications. External loop compensation is used to optimize
the transient response with optimized external components.
An accurate current sensing resistor in series with an output
inductor, or DC resistance of the inductor is used to sense
the output current of the current ramp signal, and
overcurrent protection. A peak current detecting scheme is
used for overcurrent protection and to prevent the inductor
from saturation.
The ISL6232 has internal soft-start to control the inrush
current. The soft-stop feature avoids negative output voltage
for undervoltage protection, overcurrent protection, and
shutdown by discharging output through an internal switch,
and by damping the inductor current. The ISL6232 also
features overvoltage protection, power-up sequences, power
good output, and thermal shutdown. It has quiescent power
dissipation as low as 3.5mW.
Features
• Supply Voltage Range: 5.5V to 25V
• 3.3V and 5V Fixed or Adjustable Outputs from 0.8V to
5.5V
• 5V, 3.3V/100mA Always Linear Regulators
• Out of Phase Operation Reduces the ESR Requirement of
the Input Capacitors
±1.5% Output Voltage Accuracy over Temperature
• Fixed 300kHz Current Mode Control Architecture
• Accurate Current Sensing or DCR Current Sensing
• Internal Soft-Start and Soft-Stop Output Discharge
• Selectable Power-up Sequence
• Selectable Forced PWM, Pulse Skipping, and Ultrasonic
Pulse Skipping Mode (25kHz min)
• Peak Overcurrent Limit Prevents Inductor Saturation
• Overvoltage Protection, Undervoltage Shutdown
• Power Good Output
• Thermal shutdown
• 5µA Shutdown Current
• Integrated Bootstrap Schottky Diodes
• 3.5mW Quiescent Power Dissipation
• Pb-Free Available (RoHS Compliant)
Applications
• Notebook, Sub-notebook, and Tablet Computers
• 2-4 cell Li-Ion Battery-Powered Devices
• Dual Output Supplies for DSP, Memory, Logic and
Microprocessor
• Telecom Systems, Network servers, and Storage
Ordering Information
PART
NUMBER*
TEMP.
RANGE (°C)
PACKAGE
PKG.
DWG. #
ISL6232CAZA
(Note 1)
-10° to 100° 28 Ld QSOP M28.15
(Pb-free)
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
*Add “-T” for Tape and Reel.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]