datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

ISL29011IROZ-EVALZ View Datasheet(PDF) - Intersil

Part NameDescriptionManufacturer
ISL29011IROZ-EVALZ Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function Intersil
Intersil Intersil
ISL29011IROZ-EVALZ Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ISL29011
Absolute Maximum Ratings (TA = +25°C)
VSUP(VDDD,VDDA) Supply Voltage between VDD and GND . . . . . .4V
IV2DCDBAusSu(SpCplLy,VSoDltaAg) eanbdetIwNeTePniVnDVDoAltaagned.G. N. .D.
.
.
.
.
.
.
.
.
VDDD +/- 0.5V
. . . -0.2V to 4V
I2C Bus (SCL, SDA) and INT Pin Current . . . . . . . . . . . . . . . <10mA
IRDR Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . -0.2V to VDD + 0.5V
REXT Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . -0.2V to VDD + 0.5V
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2kV
Thermal Information
Thermal Resistance (Typical, Note 4)
θJA (°C/W)
8 Ld ODFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
88
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
4. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications VSUP(VDDD,VDDA) = 3V, TA = +25°C, REXT = 499kΩ 1% tolerance, 16-bit ADC operation, unless otherwise
specified.
PARAMETER
DESCRIPTION
CONDITION
MIN
TYP MAX UNIT
VSUP
SR_VDD
ISUP(OFF)
ISUP(ON)
Power Supply Range for VDDD, VDDA (Note 5)
Required Input Power-up Slew Rate VDD rising edge between 0.4V and 2.25V
Supply Current when Powered Down Software disabled or auto power-down
Supply Current of Ambient Light and IR
Sensing
2.25
3.63 V
0.5
V/ms
0.1 0.5 µA
70
90 µA
fOSC
tint
FI2C
DATA_0
Internal Oscillator Frequency
ADC Integration/Conversion Time
I2C Clock Rate Range
Count Output When Dark
16-bit ADC data
E = 0 lux
675
750 825 kHz
90
ms
1 to 400
kHz
1
5 Counts
DATA_FS Full Scale ADC Code
65535 Counts
ΔDATA
DATA
Count Output Variation Over Three
Light Sources: Fluorescent,
Incandescent and Sunlight
Ambient light sensing
±10
%
DATA_1 Light Count Output With LSB of
0.015 lux/count
E = 300 lux, Fluorescent light (Note 6), Ambient light
sensing, Range 1 (1k lux)
15000 20000 25000 Counts
DATA_2 Light Count Output With LSB of
0.06 lux/count
E = 300 lux, Fluorescent light (Note 6), Ambient light
sensing, Range 2 (4k lux)
5000
Counts
DATA_3 Light Count Output With LSB of
0.24 lux/count
E = 300 lux, Fluorescent light (Note 6), Ambient light
sensing, Range 3 (16k lux)
1250
Counts
DATA_4 Light Count Output With LSB of
0.96 lux/count
E = 300 lux, Fluorescent light (Note 6), Ambient light
sensing, Range 4 (64k lux)
312
Counts
DATA_IR1 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing, Range 1
15000 20000 25000 Counts
DATA_IR2 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing, Range 2
5000
Counts
DATA_IR3 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing, Range 3
1250
Counts
DATA_IR4 Infrared Count Output
E = 210 lux, Sunlight (Note 7), IR sensing, Range 4
312
Counts
VREF
IINT
IIRDR1
IIRDR2
IIRDR3
IIRDR4
Voltage of REXT Pin
INT Current Sinking Capability
IRDR Source Current
IRDR Source Current
IRDR Source Current
IRDR Source Current
IS<1:0> = 0 (Note 8)
IS<1:0> = 1 (Note 8)
15Ω at IRDR pin
IS<1:0> = 2 (Note 8)
IS<1:0> = 3 (Note 8)
0.52
V
4
5
mA
100
mA
44
50
58 mA
25
mA
12.5
mA
4
FN6467.3
February 4, 2010
Direct download click here
 

Share Link : Intersil
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]