|ISL29011IROZ-T7||Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function|
|ISL29011IROZ-T7 Datasheet PDF : 16 Pages |
(Notes 1, 2, 3)
-40 to +85
8 Ld ODFN
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu
plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL29011. For more information on MSL please see techbrief
(8 LD ODFN)
EXPOSED PAD CAN BE CONNECTED TO GND OR
PIN NUMBER PIN NAME
VDDD Positive digital supply: 2.25V to 3.63V.
VDDA Positive analog supply: 2.25V to 3.63V, VDDA and VDDD should be externally shorted.
GND Ground. The thermal pad is also connected to the GND pin.
REXT External resistor pin setting the internal reference current and the conversion time. 499kΩ with 1% tolerance resistor
SCL I2C serial clock line
SDA I2C serial data line
The I2C bus lines can be pulled from 1.7V to above VDD, 3.63V max.
INT Interrupt pin; LO for interrupt/alarming. The INT pin is an open drain.
IRDR IR LED driver pin connecting to the anode of the external IR LED. The source current of the IR LED driver can be
programmed through I2C.
Exposed pad connected to ground or electrically isolated.
February 4, 2010
|Direct download click here|
|Share Link :|