Mini Small Outline Plastic Packages (MSOP)
0.20 (0.008) A B C
0.10 (0.004) C PLANE
0.20 (0.008) C
0.20 (0.008) C D
1. These package dimensions are within allowable dimensions of
2. Dimensioning and tolerancing per ANSI Y14.5M-1994.
3. Dimension â€śDâ€ť does not include mold flash, protrusions or gate
burrs and are measured at Datum Plane. Mold flash, protrusion
and gate burrs shall not exceed 0.15mm (0.006 inch) per side.
4. Dimension â€śE1â€ť does not include interlead flash or protrusions
and are measured at Datum Plane. - H - Interlead flash and
protrusions shall not exceed 0.15mm (0.006 inch) per side.
5. Formed leads shall be planar with respect to one another within
0.10mm (0.004) at seating Plane.
6. â€śLâ€ť is the length of terminal for soldering to a substrate.
7. â€śNâ€ť is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. Dimension â€śbâ€ť does not include dambar protrusion. Allowable
dambar protrusion shall be 0.08mm (0.003 inch) total in excess
of â€śbâ€ť dimension at maximum material condition. Minimum space
between protrusion and adjacent lead is 0.07mm (0.0027 inch).
10. Datums -A - and - B - to be determined at Datum plane
11. Controlling dimension: MILLIMETER. Converted inch dimen-
sions are for reference only.
M8.118 (JEDEC MO-187AA)
8 LEAD MINI SMALL OUTLINE PLASTIC PACKAGE
0.037 0.043 0.94
0.002 0.006 0.05
0.030 0.037 0.75
0.010 0.014 0.25
0.004 0.008 0.09
0.116 0.120 2.95
0.116 0.120 2.95
0.187 0.199 4.75
0.016 0.028 0.40
Rev. 2 01/03
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporationâ€™s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
September 12, 2008