datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

ISL12020M View Datasheet(PDF) - Intersil

Part NameDescriptionManufacturer
ISL12020M Low Power RTC with Battery Backed SRAM,Integrated ±5ppm Temperature Compensation and Auto Daylight Saving Intersil
Intersil Intersil
ISL12020M Datasheet PDF : 32 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
ISL12020M
OSCILLATOR FAIL BIT (OSCF)
Oscillator Fail Bit indicates that the oscillator has
stopped.
DAYLIGHT SAVING TIME CHANGE BIT (DSTADJ)
DSTADJ is the Daylight Saving Time Adjusted Bit. It
indicates the daylight saving time forward adjustment
has happened. If a DST Forward event happens , DSTADJ
will be set to “1”. The DSTADJ bit will stay high when
DSTFD event happens, and will be reset to “0” when the
DST Reverse event happens.
DSTADJ can be set to “1” for instances where the RTC
device is initialized during the DST Forward period. The
DSTE bit must be enabled when the RTC time is more
than one hour before the DST Forward or DST Reverse
event time setting, or the DST event correction will not
happen.
DSTADJ is reset to “0” upon power-up. It will reset to “0”
when the DSTE bit in Register 15h is set to “0” (DST
disabled), but no time adjustment will happen.
ALARM BIT (ALM)
This bit announces if the alarm matches the real time
clock. If there is a match, the respective bit is set to “1”.
This bit can be manually reset to “0” by the user or
automatically reset by enabling the auto-reset bit (see
ARST bit). A write to this bit in the SR can only set it to
“0”, not “1”. An alarm bit that is set by an alarm
occurring during an SR read operation will remain set
after the read operation is complete.
LOW VDD INDICATOR BIT (LVDD)
This bit indicates when VDD has dropped below the
pre-selected trip level (Brownout Mode). The trip points
for the brownout levels are selected by three bits: VDD
Trip2, VDD Trip1 and VDD Trip0 in PWR_ VDD registers.
The LVDD detection is only enabled in VDD mode and
the detection happens in real time. The LVDD bit is set
whenever the VDD has dropped below the pre-selected
trip level, and self clears whenever the VDD is above the
pre-selected trip level.
LOW BATTERY INDICATOR 85% BIT (LBAT85)
In Normal Mode (VDD), this bit indicates when the
battery level has dropped below the pre-selected trip
levels. The trip points are selected by three bits:
VB85Tp2, VB85Tp1 and VB85Tp0 in the PWR_VBAT
registers. The LBAT85 detection happens automatically
once every minute when seconds register reaches 59.
The detection can also be manually triggered by setting
the TSE bit in BETA register to “1”. The LBAT85 bit is set
when the VBAT has dropped below the pre-selected trip
level, and will self clear when the VBAT is above the
pre-selected trip level at the next detection cycle either
by manual or automatic trigger.
In Battery Mode (VBAT), this bit indicates the device has
entered into battery mode by polling once every 10
minutes. The LBAT85 detection happens automatically
once when the minute register reaches x9h or x0h
minutes.
Example - When the LBAT85 is Set To “1” In
Battery Mode:
The minute the register changes to 19h when the device
is in battery mode, the LBAT85 is set to “1” the next time
the device switches back to Normal Mode.
Example - When the LBAT85 Remains at “0” In
Battery Mode:
If the device enters into battery mode after the minute
register reaches 20h and switches back to Normal Mode
before the minute register reaches 29h, then the
LBAT85 bit will remain at “0” the next time the device
switches back to Normal Mode.
LOW BATTERY INDICATOR 75% BIT (LBAT75)
In Normal Mode (VDD), this bit indicates when the
battery level has dropped below the pre-selected trip
levels. The trip points are selected by three bits:
VB75Tp2, VB75Tp1 and VB75Tp0 in the PWR_VBAT
registers. The LBAT75 detection happens automatically
once every minute when seconds register reaches 59.
The detection can also be manually triggered by setting
the TSE bit in BETA register to “1”. The LBAT75 bit is set
when the VBAT has dropped below the pre-selected trip
level, and will self clear when the VBAT is above the pre-
selected trip level at the next detection cycle either by
manual or automatic trigger.
In Battery Mode (VBAT), this bit indicates the device has
entered into battery mode by polling once every 10
minutes. The LBAT85 detection happens automatically
once when the minute register reaches x9h or x0h
minutes.
Example - When the LBAT75 is Set to “1” in Battery
Mode:
The minute register changes to 30h when the device is in
battery mode, the LBAT75 is set to “1” the next time the
device switches back to Normal Mode.
Example - When the LBAT75 Remains at “0” in
Battery Mode:
If the device enters into battery mode after the minute
register reaches 49h and switches back to Normal Mode
before minute register reaches 50h, then the LBAT75 bit
will remain at “0” the next time the device switches
back to Normal Mode.
REAL TIME CLOCK FAIL BIT (RTCF)
This bit is set to a “1” after a total power failure. This is a
read only bit that is set by hardware (ISL12020M
internally) when the device powers up after having lost
all power (defined as VDD = 0V and VBAT = 0V). The bit
is set regardless of whether VDD or VBAT is applied first.
The loss of only one of the supplies does not set the RTCF
bit to “1”. The first valid write to the RTC section after a
complete power failure resets the RTCF bit to “0” (writing
one byte is sufficient).
15
FN6667.4
February 11, 2010
Direct download click here
 

Share Link : Intersil
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]