datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

ICL232CBEZ View Datasheet(PDF) - Intersil

Part NameICL232CBEZ Intersil
Intersil Intersil
Description+5V powered, dual RS-232 transmitter/receiver
ICL232CBEZ Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
®
Datasheet
July 28, 2005
ICL232
FN3020.7
+5V Powered, Dual RS-232
Transmitter/Receiver
The ICL232 is a dual RS-232 transmitter/receiver interface
circuit that meets all ElA RS-232C and V.28 specifications. It
requires a single +5V power supply, and features two
onboard charge pump voltage converters which generate
+10V and -10V supplies from the 5V supply.
The drivers feature true TTL/CMOS input compatibility, slew-
rate-limited output, and 300power-off source impedance.
The receivers can handle up to +30V, and have a 3kto
7kinput impedance. The receivers also have hysteresis to
improve noise rejection.
Ordering Information
PART NUMBER
ICL232CPE
ICL232CBE
TEMP.
RANGE (oC)
PACKAGE
0 to 70 16 Ld PDIP
0 to 70 16 Ld SOIC
PKG.
DWG. #
E16.3
M16.3
ICL232CBET
16 Ld SOIC Tape and Reel
M16.3
ICL232CBEZ
(See Note)
0 to 70
16 Ld SOIC
(Pb-free)
M16.3
ICL232CBEZT
(See Note)
16 Ld SOIC Tape and Reel
(Pb-free)
M16.3
ICL232lPE
-40 to 85 16 Ld PDIP
E16.3
ICL232lBE
-40 to 85 16 Ld SOIC
M16.3
ICL232lBET
16 Ld SOIC Tape and Reel
M16.3
ICL232MJE
-55 to 125 16 Ld CERDIP F16.3
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• Meets All RS-232C and V.28 Specifications
• Requires Only Single +5V Power Supply
• Onboard Voltage Doubler/Inverter
• Low Power Consumption
• 2 Drivers
- ±9V Output Swing for +5V lnput
- 300Power-off Source Impedance
- Output Current Limiting
- TTL/CMOS Compatible
- 30V/µs Maximum Slew Rate
• 2 Receivers
- ±30V Input Voltage Range
- 3kto 7kInput Impedance
- 0.5V Hysteresis to Improve Noise Rejection
• All Critical Parameters are Guaranteed Over the Entire
Commercial, Industrial and Military Temperature Ranges
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Any System Requiring RS-232 Communications Port
- Computer - Portable and Mainframe
- Peripheral - Printers and Terminals
- Portable Instrumentation
- Modems
• Dataloggers
Pinout
ICL232 (PDIP, CERDIP, SOIC)
TOP VIEW
C1+ 1
V+ 2
C1- 3
C2+ 4
C2- 5
V- 6
T2OUT 7
R2IN 8
16 VCC
15 GND
14 T1OUT
13 R1IN
12 R1OUT
11 T1IN
10 T2IN
9 R2OUT
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
Direct download click here
 

The ICL232 is a dual RS-232 transmitter/receiver interface circuit that meets all ElA RS-232C and V.28 specifications. It requires a single +5V power supply, and features two onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The drivers feature true TTL/CMOS input compatibility, slew rate-limited output, and 300Ωpower-off source impedance. The receivers can handle up to +30V, and have a 3kΩ to 7kΩinput impedance. The receivers also have hysteresis to improve noise rejection.

 

Share Link : Intersil
All Rights Reserved © datasheetbank.com 2014 - 2018 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]