datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

HI-3200 View Datasheet(PDF) - Holt Integrated Circuits

Part Name
Description
View to exact match
HI-3200 Datasheet PDF : 59 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
HI-3200, HI-3201
ARINC 429 FIFO Threshold Value Register
Threshold
FIFO THRESHOLD VALUE
(Address 0x8021)
000
76543210
MSB
LSB
Default = 0x10
Threshold Value
Description
00000
Threshold flag is set if at least 1 message is in FIFO (Same as FIFO NOT EMPTY FLAG)
00001
Threshold flag is set if more than one message are in the FIFO
00010
Threshold flag is set if more than two messages are in the FIFO
00011
Threshold flag is set if more than three messages are in the FIFO
10000
Threshold flag is set if more than sixteen messages are in the FIFO (default)
11111
Threshold flag is set if 32 messages are in the FIFO (Same as FIFO FULL FLAG)
ARINC 429 Loop-back Self-Test
The HI-3200 includes an ARINC 429 loop-back feature,
which allows users to exercise the ARINC 429 transmit and
receive channels for self-test purposes. The ARINC 429
Loop-Back register, ALOOP defines which receiver
channels are in loop-back mode. When a “1” is
programmed in the ALOOP bit position for a receiver, then
its ARINC 429 bus connection to the external pins is broken
and instead the input is connected to one of the four ARINC
429 transmit channels. Transmit channel 0 is connected to
receive channel 0 and 1, transmit channel 1 is connected to
receive channels 2 and 3, and so on.
When in loop-back mode, incoming ARINC 429 messages
are ignored by the HI-3200. When running in loop-back
mode the ARINC 429 transmit pins may be disabled by
pulling the TXMSK input high. This prevents test messages
from being output to the external ARINC 429 transmit
buses.
ARINC 429 LOOPBACK
(Address 0x8022)
ALOOAPL7OOAPL6OOAPL5OOAPL4OOAPL3OOAPL2OOP1
76543210
MSB
LSB
Bit Name
R/W Default Description
7 ALOOP7
R/W 0 This bit is set to “1” to loop-back transmit channel 3 to receiver 7
6 ALOOP6
R/W 0 This bit is set to “1” to loop-back transmit channel 3 to receiver 6
5 ALOOP5
R/W 0 This bit is set to “1” to loop-back transmit channel 2 to receiver 5
4 ALOOP4
R/W 0 This bit is set to “1” to loop-back transmit channel 2 to receiver 4
3 ALOOP3
R/W 0 This bit is set to “1” to loop-back transmit channel 1 to receiver 3
2 ALOOP2
R/W 0 This bit is set to “1” to loop-back transmit channel 1 to receiver 2
1 ALOOP1
R/W 0 This bit is set to “1” to loop-back transmit channel 0 to receiver 1
0 ALOOP0
R/W 0 This bit is set to “1” to loop-back transmit channel 0 to receiver 0
HOLT INTEGRATED CIRCUITS
20
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]