datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

HCPL-0453-600 View Datasheet(PDF) - HP => Agilent Technologies

Part NameHCPL-0453-600 HP
HP => Agilent Technologies HP
DescriptionHIGH SPEED TRANSISTOR OPTOCOUPLERS
HCPL-0453-600 Datasheet PDF : 17 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
These single channel optocoup-
lers are available in 8-Pin DIP,
SO-8 and Widebody package
configurations.
The 6N135, HCPL-0500, and
HCNW135 are for use in TTL/
CMOS, TTL/LSTTL or wide
bandwidth analog applications.
Current transfer ratio (CTR) for
these devices is 7% minimum at
IF = 16 mA.
The 6N136, HCPL-0501, and
HCNW136 are designed for high
speed TTL/TTL applications. A
standard 16 mA TTL sink current
through the input LED will
provide enough output current
for 1 TTL load and a 5.6 kpull-
up resistor. CTR for these devices
is 19% minimum at IF = 16 mA.
The HCPL-4503, HCPL-0453,
and HCNW4503 are similar to the
HCPL-4502, HCPL-0452, and
HCNW4502 optocouplers but
have increased common mode
transient immunity of 15 kV/µs
minimum at VCM = 1500 V
guaranteed.
The HCPL-4502, HCPL-0452,
and HCNW4502 provide the
electrical and switching
performance of the 6N136,
HCPL-0501, and HCNW136 with
increased ESD protection.
Selection Guide
Minimum CMR
8-Pin DIP (300 Mil)
dV/dt
(V/µs)
Current
VCM Transfer
(V) Ratio (%)
Single
Channel
Package
Dual
Channel
Package*
1,000 10
7
6N135 HCPL-2530
19
6N136 HCPL-2531
HCPL-4502†
15,000 1500
19
HCPL-4503† HCPL-4534
1,000 10
9
Small-Outline SO-8
Single
Channel
Package
Dual
Channel
Package*
HCPL-0500 HCPL-0530
HCPL-0501 HCPL-0531
HCPL-0452†
HCPL-0453† HCPL-0534
Widebody
(400 Mil)
Single
Channel
Package
HCNW135
HCNW136
HCNW4502†
HCNW4503†
Hermetic
Single and
Dual Channel
Packages*
HCPL-55XX
HCPL-65XX
4N55
*Technical data for these products are on separate HP publications.
†Pin 7, transistor base, is not connected.
1-17
Direct download click here

Description
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

Features
• 15 kV/µs Minimum Common
   Mode Transient Immunity at VCM = 1500 V (4503/0453)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8-Pin DIP, SO-8, Widebody Packages
• Open Collector Output
• Guaranteed Performance
   from Temperature: 0°C to 70°C
• Safety Approval
   UL Recognized – 2500 V rms
      for 1 minute (5000 V rms for
      1 minute for HCNW and
      Option 020 devices) per
      UL1577
   CSA Approved
   VDE 0884 Approved
      –VIORM = 630 V peak for
         HCPL-4503#060
      –VIORM = 1414 V peak for
         HCNW devices
   BSI Certified
   (HCNW devices only)
• Dual Channel Version
   Available (253X/4534/053X/0534)
• MIL-STD-1772 Version Available (55XX/65XX/4N55)

Applications
• High Voltage Insulation
• Video Signal Isolation
• Power Transistor Isolation in Motor Drives
• Line Receivers
• Feedback Element in Switched Mode Power Supplies
• High Speed Logic Ground
   Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL
• Replaces Pulse Transformers
• Replaces Slow Phototransistor Isolators
• Analog Signal Ground Isolation

Share Link : HP

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]