datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

HCNW2211-300 View Datasheet(PDF) - Avago Technologies

Part NameHCNW2211-300 AVAGO
Avago Technologies AVAGO
DescriptionVery High CMR, Wide VCC Logic Gate Optocouplers
HCNW2211-300 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics
(HCPL-2211/2212 Option 060 ONLY)
Description
Symbol
Installation classification per DIN VDE 0110/1.89, Table 1
  for rated mains voltage ≤300 V rms
  for rated mains voltage ≤450 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
VIORM
Input to Output Test Voltage, Method b*
  VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec,
VPR
  Partial Discharge < 5 pC
Input to Output Test Voltage, Method a*
  VIORM x 1.5 = VPR, Type and sample test,
  tm = 60 sec, Partial Discharge < 5 pC
Highest Allowable Overvoltage*
(Transient Overvoltage, tini = 10 sec)
Safety Limiting Values
  (Maximum values allowed in the event of a failure,
  also see Figure 12, Thermal Derating curve.)
   Case Temperature
   Input Current
   Output Power
Insulation Resistance at TS, VIO = 500 V
VPR
VIOTM
TS
IS,OUTPUT
PS,OUTPUT
RS
Characteristic
Units
I-IV
I-III
55/85/21
2
630
V peak
1181
V peak
945
V peak
6000
V peak
175
°C
230
mA
600
mW
≥109
Ω
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN 60747-5-2, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in applica-
tion.
8
Direct download click here
 

Description
The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat ing the need for additional waveshaping.

Features
• 10 kV/µs minimum Common Mode Rejection
(CMR) at VCM = 1000 V (HCPL-2211/2212/0211/2232,HCNW2211)
• Wide operating VCC range: 4.5 to 20 Volts
• 300 ns propagation delay guaranteed over the full temperature range
• 5 Mbd typical signal rate
• Low input current (1.6 mA to 1.8 mA)
• Hysteresis
• Totem pole output (no pullup resistor required)
• Available in 8-Pin DIP, SOIC-8, widebody packages
• Guaranteed performance from -40°C to 85°C
• Safety approval
– UL recognized -3750 V rms for 1 minute (5000V rms for 1 minute for HCNW22XX) per UL1577
– CSAapproved
– IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (HCPL-2211/2212 Option 060 only) and V
IORM = 1414 V peak (HCNW22XX only)
• MIL-PRF-38534 hermetic version available (HCPL-52XX/62XX)

Applications
• Isolation of high speed logic systems
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Ground loop elimination
• Pulse transformer replacement
• High speed line receiver
• Power control systems

Share Link : AVAGO
@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]