datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

HCNW2211-300 View Datasheet(PDF) - Avago Technologies

Part NameHCNW2211-300 AVAGO
Avago Technologies AVAGO
DescriptionVery High CMR, Wide VCC Logic Gate Optocouplers
HCNW2211-300 Datasheet PDF : 18 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Recommended Pb-Free IR Profile
tp
Tp
TL 217 °C
* 260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
Tsmax
150 - 200 °C
Tsmin
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
15 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
NOTES:
THE TIME FROM 25 °C to PEAK
TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
ts
PREHEAT
60 to 180 SEC.
tL
60 to 150 SEC.
NOTE: NON-HALIDE FLUX SHOULD BE USED.
* RECOMMENDED PEAK TEMPERATURE
FOR WIDEBODY 400mils PACKAGE IS 245 °C
25
t 25 °C to PEAK
TIME
Regulatory Information
The HCPL-22XX/02XX and HCNW22XX have been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(Option 060 and HCNW only)
Insulation and Safety Related Specifications
8-pin DIP Package
Parameter
Symbol
8-Pin DIP
(300 Mil) SO-8
Value
Value
Widebody
(400 Mil)
Value
Units
Minimum External
L(101)
7.1
4.9
9.6
mm
Air Gap (External
Clearance)
Minimum External
L(102)
7.4
4.8
10.0
mm
Tracking (External
Creepage)
Minimum Internal
0.08
0.08
1.0
mm
Plastic Gap
(Internal Clearance)
Minimum Internal
NA
NA
4.0
mm
Tracking (Internal
Creepage)
Tracking Resistance
CTI
(Comparative
Tracking Index)
200
200
200
Volts
Isolation Group
IIIa
IIIa
IIIa
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
Conditions
Measured from input terminals
to output terminals, shortest
distance through air.
Measured from input terminals
to output terminals, shortest
distance path along body.
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Measured from input terminals
to output terminals, along
internal cavity.
DIN IEC 112/VDE 0303 Part 1
Material Group
(DIN VDE 0110, 1/89, Table 1)
7
Direct download click here
 

Description
The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically-coupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminat ing the need for additional waveshaping.

Features
• 10 kV/µs minimum Common Mode Rejection
(CMR) at VCM = 1000 V (HCPL-2211/2212/0211/2232,HCNW2211)
• Wide operating VCC range: 4.5 to 20 Volts
• 300 ns propagation delay guaranteed over the full temperature range
• 5 Mbd typical signal rate
• Low input current (1.6 mA to 1.8 mA)
• Hysteresis
• Totem pole output (no pullup resistor required)
• Available in 8-Pin DIP, SOIC-8, widebody packages
• Guaranteed performance from -40°C to 85°C
• Safety approval
– UL recognized -3750 V rms for 1 minute (5000V rms for 1 minute for HCNW22XX) per UL1577
– CSAapproved
– IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (HCPL-2211/2212 Option 060 only) and V
IORM = 1414 V peak (HCNW22XX only)
• MIL-PRF-38534 hermetic version available (HCPL-52XX/62XX)

Applications
• Isolation of high speed logic systems
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Ground loop elimination
• Pulse transformer replacement
• High speed line receiver
• Power control systems

Share Link : AVAGO
@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]