datasheetbank_Logo    전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크
부품명 :

HCPL-0500-000E 데이터 시트보기 (PDF) - Avago Technologies

부품명HCPL-0500-000E AVAGO
Avago Technologies AVAGO
상세내역Single Channel, High Speed Optocouplers
HCPL-0500-000E Datasheet PDF : 17 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Recommended Pb-Free IR Profile
tp
Tp
TL 217 °C
* 260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
Tsmax
150 - 200 °C
Tsmin
ts
PREHEAT
tL
60 to 180 SEC.
25
t 25 °C to PEAK
TIME
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
15 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
NOTES:
THE TIME FROM 25 °C to PEAK
TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
NON-HALIDE FLUX SHOULD BE USED.
* RECOMMENDED PEAK TEMPERATURE FOR
WIDEBODY 400mils PACKAGE IS 245 °C
Regulatory Information
The devices contained in this data sheet have been approved by the following organizations:
UL
IEC/EN/DIN EN 60747-5-2
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice #5,
File CA 88324.
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(HCNW and Option 060 only)
Insulation and Safety Related Specifications
Parameter
Symbol
8-Pin DIP
(300 Mil) SO-8
Value
Value
Widebody
(400 Mil)
Value
Units      Conditions
Minimum External
L(101)
7.1
4.9
9.6
mm
Air Gap (External
Clearance)
Measured from input terminals
to output terminals, shortest
distance through air.
Minimum External
L(102)
7.4
4.8
10.0
mm
Tracking (External
Creepage)
Measured from input terminals
to output terminals, shortest
distance path along body.
Minimum Internal
0.08
0.08
1.0
mm
Plastic Gap
(Internal Clearance)
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Minimum Internal
NA
NA
4.0
mm
Tracking (Internal
Creepage)
Measured from input terminals
to output terminals, along
internal cavity.
Tracking Resistance
CTI
(Comparative
Tracking Index)
200
200
200
Volts DIN IEC 112/VDE 0303 Part 1
Isolation Group
IIIa
IIIa
IIIa
Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
7
Direct download click here
 

Description
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocouplers are available in 8-Pin DIP, SO-8 and Widebody package configurations.

Features
• High speed: 1 Mb/s
• TTL compatible
• Available in 8-Pin DIP, SO-8, widebody packages
• Open collector output
• Safety approval
UL Recognized – 3750 Vrms for 1 minute (5000 Vrms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
– VIORM = 560 V peak for SO8 devices
– VIORM = 630 V peak for DIP 300mil devices
– VIORM = 1414 V peak for DIP 400mil (widebody) devices
• Dual channel version available (253X/053X/0534)

Applications
• High voltage insulation
• Video signal isolation
• Line receivers
• Feedback element in switched mode power supplies
• High speed logic ground isolation
– TTL/TTL, TTL/CMOS, TTL/LSTTL
• Replaces pulse transformers
• Replaces slow phototransistor isolators
• Analog signal ground isolation

Share Link : AVAGO
@ 2014 - 2018  [ ][ 개인정보 보호정책 ] [ 요청 데이타시트 ][ 제휴문의 ]