datasheetbank_Logo    전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크
부품명 :

HCPL-0500-000E 데이터 시트보기 (PDF) - Avago Technologies

부품명HCPL-0500-000E AVAGO
Avago Technologies AVAGO
상세내역Single Channel, High Speed Optocouplers
HCPL-0500-000E Datasheet PDF : 17 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Electrical Specifications (DC)
Over recommended temperature (TA = 0°C to 70°C) unless otherwise specified. See note 13.
Parameter
Symbol Device Min. Typ.** Max. Units
Test Conditions
Fig. Note
Current
CTR*
6N135
7
18
50 % TA = 25°C VO = 0.4 V IF = 16 mA, 1, 2, 5, 11
Transfer Ratio
HCPL-0500 5
19
HCNW135
VO = 0.5 V VCC = 4.5 V 4
HCPL-2502 15
22
15 25
6N136
19 24 50
HCPL-0501 15 25
HCNW136
TA = 25°C
TA = 25°C
VO = 0.4 V
VO = 0.5 V
VO = 0.4 V
VO = 0.5 V
Logic Low
VOL
Output Voltage
6N135
HCPL-0500
HCNW135
0.1
0.4
V TA = 25°C IO = 1.1 mA IF = 16 mA,
0.1 0.5
IO = 0.8 mA VCC = 4.5 V
6N136
HCPL-2502
HCPL-0501
HCNW136
0.1 0.4
0.1 0.5
TA = 25°C
IO = 3.0 mA
IO = 2.4 mA
Logic High
IOH*
Output Current
Logic Low
ICCL
Supply Current
Logic High
ICCH*
Supply Current
Input Forward VF*
8-Pin DIP
Voltage SO-8
0.003 0.5 µA TA = 25°C VO = VCC = 5.5 V IF = 0 mA 7
0.01 1
TA = 25°C VO = VCC = 15 V
50
VO = VCC = 15 V
50 200 µA
IF = 16 mA, VO = Open,
13
VCC = 15 V
0.02
1
µA TA = 25°C
IF = 0 mA,
13
VO = Open,
2
VCC = 15 V
1.5 1.7 V TA = 25°C IF = 16 mA
3
1.8
Widebody 1.45 1.68 1.85
1.35
1.95
TA = 25°C IF = 16 mA
Input Reverse BVR* 8-Pin DIP
5
Breakdown
SO-8
Voltage
Widebody 3
V IR = 10 µA
IR = 100
µA
Temperature
∆VF/
8-Pin DIP
Coefficient of
∆TA
SO-8
Forward Volt-
Widebody
age
-1.6
mV/°C IF = 16 mA
-1.9
Input
CIN
8-Pin DIP
60
pF
f = 1 MHz, VF = 0 V
Capacitance
SO-8
Widebody
90
Transistor DC
hFE
8-Pin DIP
150
Current Gain
SO-8
130
Widebody
180
160
VO = 5 V, IO = 3 mA
VO = 0.4 V, IB = 20 µA
VO = 0.4 V, IB = 20 µA
VO = 5 V, IO = 3 mA
*For JEDEC registered parts.
**All typicals at TA = 25°C.
10
Direct download click here
 

Description
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocouplers are available in 8-Pin DIP, SO-8 and Widebody package configurations.

Features
• High speed: 1 Mb/s
• TTL compatible
• Available in 8-Pin DIP, SO-8, widebody packages
• Open collector output
• Safety approval
UL Recognized – 3750 Vrms for 1 minute (5000 Vrms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
– VIORM = 560 V peak for SO8 devices
– VIORM = 630 V peak for DIP 300mil devices
– VIORM = 1414 V peak for DIP 400mil (widebody) devices
• Dual channel version available (253X/053X/0534)

Applications
• High voltage insulation
• Video signal isolation
• Line receivers
• Feedback element in switched mode power supplies
• High speed logic ground isolation
– TTL/TTL, TTL/CMOS, TTL/LSTTL
• Replaces pulse transformers
• Replaces slow phototransistor isolators
• Analog signal ground isolation

Share Link : AVAGO
@ 2014 - 2018  [ ][ 개인정보 보호정책 ] [ 요청 데이타시트 ][ 제휴문의 ]