datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

HCPL-0300-300 View Datasheet(PDF) - HP => Agilent Technologies

Part NameHCPL-0300-300 HP
HP => Agilent Technologies HP
Description8 MBd Low Input Current Optocoupler


HCPL-0300-300 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
4
Solder Reflow Temperature Profile
300
PREHEATING RATE 3°C + 1°C/0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC. PEAK
TEMP.
245°C
200
160°C
150°C
140°C
100
2.5°C ± 0.5°C/SEC.
3°C + 1°C/0.5°C
PREHEATING TIME
150°C, 90 + 30 SEC.
30
SEC.
30
SEC.
PEAK
TEMP.
240°C
PEAK
TEMP.
230°C
SOLDERING
TIME
200°C
50 SEC.
ROOM
TEMPERATURE
0
0
TIGHT
TYPICAL
LOOSE
50
100
150
200
250
TIME (SECONDS)
Recommended Pb-Free IR Profile
tp
Tp
TL 217 °C
260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
Tsmax 150 - 200 °C
Tsmin
ts
PREHEAT
tL
60 to 180 SEC.
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
25
t 25 °C to PEAK
TIME
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
Regulatory Information
The HCPL-2300 has been
approved by the following
organizations:
UL
Recognized under UL 1577,
Component Recognition Program,
File E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
(Option 060 only)
Insulation and Safety Related Specifications
Parameter
Min. External Air Gap
(External Clearance)
Symbol Value Units
Conditions
L(IO1) 7.1 mm Measured from input terminals to output
terminals, shortest distance through air
Min. External Tracking Path
(External Creepage)
Min. Internal Plastic Gap
(Internal Clearance)
L(IO2)
7.4
0.08
mm Measured from input terminals to output
terminals, shortest distance path along body
mm Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity
Tracking Resistance
CTI
(Comparative Tracking Index)
Isolation Group
200 Volts DIN IEC 112/VDE 0303 PART 1
IIIa
Material Group (DIN VDE 0110, 1/89, Table 1)
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
Direct download click here

Description
The HCPL-2300/HCPL-0300 optocoupler combines an 820 nm AlGaAs photon emitting diode with an integrated high gain photon detector. This combination of Agilent designed and manufactured semiconductor devices brings new high performance capabilities to designers of isolated logic and data communication circuits.
The new low current, high speed AlGaAs emitter manufactured with a unique diffused junction, has the virtue of fast rise and fall times at low drive currents.
Figure 6 illustrates the propagation delay vs. input current characteristic. These unique characteristics enable this device to be used in an RS-232-C interface with ground loop isolation and improved common mode rejection. As a line receiver, the HCPL-2300/HCPL-0300 will operate over longer line lengths for a given data rate because of lower IF and VF specifications.

Features
• Guaranteed Low Thresholds:
   IF = 0.5 mA, VF ≤ 1.5 V
• High Speed: Guaranteed 5 MBd over Temperature
• Versatile: Compatible with TTL, LSTTL and CMOS
• Efficient 820 nm AlGaAs LED
• Internal Shield for Guaranteed Common Mode Rejection
• Schottky Clamped, Open Collector Output with Optional Integrated Pull-Up Resistor
• Static and Dynamic Performance Guaranteed from -40°C to 85°C
• Safety Approval
   UL Recognized -3750 V rms for
      1 minute
   CSA Approved
   IEC/EN/DIN EN 60747-5-2
   Approved with VIORM = 630
   V peak
   (Option 060)
  
Applications
• Ground Loop Elimination
• Computer-Peripheral Interfaces
• Level Shifting
• Microprocessor System Interfaces
• Digital Isolation for A/D, D/A Conversion
• RS-232-C Interface
• High Speed, Long Distance Isolated Line Receiver

 

Share Link : HP

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]