datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

FAN4802SMY View Datasheet(PDF) - Fairchild Semiconductor

Part Name
Description
View to exact match
FAN4802SMY
Fairchild
Fairchild Semiconductor Fairchild
FAN4802SMY Datasheet PDF : 19 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Pin Configuration
Figure 7. Pin Configuration (Top View)
Pin Definitions
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Name Description
IEA
Output of PFC Current Amplifier. The signal from this pin is compared with an internal
sawtooth to determine the pulse width for PFC gate drive.
IAC
Input AC Current. For normal operation, this input provides current reference for the multiplier.
The suggested maximum IAC is 100µA.
ISENSE
PFC Current Sense. The non-inverting input of the PFC current amplifier and the output of
multiplier and PFC ILIMIT comparator.
VRMS Line-Voltage Detection. The pin is used for the PFC multiplier.
PWM Soft-Start. During startup, the SS pin charges an external capacitor with a 10µA
SS constant current source. The voltage on FBPWM is clamped by SS during startup. If a
protection condition occurs and/or PWM is disabled, the SS pin is quickly discharged.
FBPWM PWM Feedback Input. The control input for voltage-loop feedback of PWM stage.
RT/CT
RAMP
Oscillator RC Timing Connection. Oscillator timing node; timing set by RT and CT.
PWM RAMP Input. In current mode, this pin functions as the current-sense input; when in
voltage mode, it is the feedforward sense input from PFC output 380V (feedforward ramp).
ILIMIT Peak Current Limit Setting for PWM. The peak current limits setting for PWM.
GND Ground.
OPWM
PWM Gate Drive. The totem-pole output drive for PWM MOSFET. This pin is internally
clamped under 19V to protect the MOSFET.
OPFC
PFC Gate Drive. The totem-pole output drive for PFC MOSFET. This pin is internally clamped
under 15V to protect the MOSFET.
VDD
Supply. The power supply pin. The threshold voltages for startup and turn-off are 11V and
9.3V, respectively. The operating current is lower than 10mA.
VREF Reference Voltage. Buffered output for the internal 7.5V reference.
FBPFC
Voltage Feedback Input for PFC. The feedback input for PFC voltage loop. The inverting
input of PFC error amplifier. This pin is connected to the PFC output through a divider network.
VEA
Output of PFC Voltage Amplifier. The error amplifier output for PFC voltage feedback loop.
A compensation network is connected between this pin and ground.
© 2010 Fairchild Semiconductor Corporation
FAN4800AS/CS/01S/02S • Rev. 1.0.1
6
www.fairchildsemi.com
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]