EN29LV160AB-70TC View Datasheet(PDF) - Eon Silicon Solution Inc.

Part Name

Description

View to exact match

EN29LV160AB-70TC

16 Megabit (2048K x 8-bit / 1024K x 16-bit) Flash Memory Boot Sector Flash Memory, CMOS 3.0 Volt-only

Eon Silicon Solution Inc. 

EN29LV160A

EN29LV160A

16 Megabit (2048K x 8-bit / 1024K x 16-bit) Flash Memory

Boot Sector Flash Memory, CMOS 3.0 Volt-only

FEATURES

• 3.0V, single power supply operation

- Minimizes system level power requirements

• High performance

- Access times as fast as 70 ns

• Low power consumption (typical values at 5

MHz)

- 9 mA typical active read current

- 20 mA typical program/erase current

- Less than 1 µA standby current

• Flexible Sector Architecture:

- One 16-Kbyte, two 8-Kbyte, one 32-Kbyte,

and thirty-one 64-Kbyte sectors (byte mode)

- One 8-Kword, two 4-Kword, one 16-Kword

and thirty-one 32-Kword sectors (word mode)

• Sector protection :

- Hardware locking of sectors to prevent

program or erase operations within individual

sectors

- Additionally, temporary Sector Group

Unprotect allows code changes in previously

locked sectors.

• High performance program/erase speed

- Byte/Word program time: 8µs typical

- Sector erase time: 500ms typical

- Chip erase time: 17.5s typical

• JEDEC Standard program and erase

commands

• JEDEC standard DATA# polling and toggle

bits feature

• Single Sector and Chip Erase

• Sector Unprotect Mode

• Embedded Erase and Program Algorithms

• Erase Suspend / Resume modes:

Read and program another Sector during

Erase Suspend Mode

• Triple-metal double-poly triple-well CMOS

Flash Technology

• Low Vcc write inhibit < 2.5V

• minimum 1,000K program/erase endurance

cycle

• Package Options

- 48-pin TSOP (Type 1)

- 48 ball 6mm x 8mm FBGA

• Commercial and Industrial Temperature

Range

GENERAL DESCRIPTION

The EN29LV160A is a 16-Megabit, electrically erasable, read/write non-volatile flash memory,

organized as 2,097,152 bytes or 1,048,576 words. Any byte can be programmed typically in 8µs.

The EN29LV160A features 3.0V voltage read and write operation, with access times as fast as

70ns to eliminate the need for WAIT states in high-performance microprocessor systems.

The EN29LV160A has separate Output Enable (OE#), Chip Enable (CE#), and Write Enable

(WE#) controls, which eliminate bus contention issues. This device is designed to allow either

single Sector or full chip erase operation, where each Sector can be individually protected

against program/erase operations or temporarily unprotected to erase or program. The device

can sustain a minimum of 1,000K program/erase cycles on each Sector.

This Data Sheet may be revised by subsequent versions 1

or modifications due to changes in technical specifications.

©2004 Eon Silicon Solution, Inc., www.essi.com.tw

Rev. C, Issue Date: 2005/01/07

Share Link: