Series DPA
1.0Amp • 120, 240 Vac • 16 PIN DIP Package
• Compact for High
Density PCB M ount
• DC Control
• SCR Output
• Zero Cross Sw itching
The Series DPA solid state relays are
rated at 1.0 Amp RMS at ambient tem-
peratures up to 40ûC. The compact 16
pin DIP package is perfect for high den-
sity printed circuit boards. The DPA is
offered in your choice of either voltage
or current operated versions.
Manufactured in CrydomÕs ISO 9001
Certified facility for optimum product
performance and reliability.
CURRENT DERATING CURVE
1.0
0.75
0.5
0.25
20
40
60
80
AMBIENT TEMPERATURE (˚C)
Max. Load Current vs. Temp.
16
+
INPUT
--
1
10
AC
OUTPUT
AC
8
PIN 8: AC LOAD
PIN 10:AC LOAD
PIN 16:+DC CONTROL
PIN 1: -DC CONTROL
.19
(4.8)
.850
(21.6)
.265
(6.7)
MODEL NO.
INPUT SPECIFICATIONS ➀
Control Voltage Range
DPA4111 DPA4119
------ 3.5-10 Vdc
DPA6111 DPA6119
------ 3.5-10 Vdc
Control Current Range
10-35 mA
------
10-35 mA ------
Nominal Input Impedance
------
270 Ohm
------ 270 Ohm
Typical Input Current @ 5 Vdc
------
15 mAdc
------
15 mAdc
Must Turn On Voltage
------
3.5 Vdc
------
3.5 Vdc
Must Turn On Current
10 mA
------
10 mA
------
Must Turn Off Voltage
------
1.0 Vdc
------
1.0 Vdc
Must Turn Off Current
1 mA
------
1 mA
------
OUTPUT SPECIFICATIONS ➀
Operating Voltage Range (47-63 Hz)
20-140 Vrms
20-280 Vrms
Load Current Range
.025 - 1.0 Arms
Transient Over-Voltage
400 Vpk
600 Vpk
Max. Surge Current, (16.6ms)
Min. Off-State dv/dt @ Max. Rated Voltage ➂
30 Apk
500 V/µsec
Max.Off-State Leakage @ Rated Voltage
.01 mArms
Max. On-State Voltage Drop @ Rated Current
1.2 Vpk
Max.Turn-On Time
1/2 cycle
Max. Turn-Off TIme
1/2 cycle
Power Factor (Min.) WIth Max. Load
0.5
.025
(.6) .125
(3.2)
16
.70
(17.8)
.60
(15.2)
10
GENERAL SPECIFICATIONS
Dielectric Strength ➁
.300
Insulation Resistance (Min.) @ 500 Vdc ➁
(7.6)
Max. Capacitance, Input-Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
3750 Vrms
109 Ohm
2.0 pF
-30 to 80˚C
-30 to 125˚C
1
8
All dimensions are in inches (millimeters)
M ECHANICAL SPECIFICATIONS
Weight: (typical)
Encapsulation:
.10 oz. (2.9 g)
Thermally Conductive Epoxy
GENERAL NOTES
➀ All parameters at 25˚C unless otherwise specified.
➁ Dielectric and insulation resistance are measured between input and output.
➂ Off-State dv/dt test method per EIA/NARM standard RS-443.
©2003 CRYDOM CORP, Specifications subject to change without notice.
APPROVALS
UL E116950
CSA LR81689
FastFax Document No.101
SERIES DPA
Rev. 111203
PAGE 1 OF 1
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506