H1084E View Datasheet(PDF) - Hi-Sincerity Microelectronics

Part Name

Description

View to exact match

H1084E

5A LOW DROPOUT POSITIVE VOLTAGE REGULATOR

Hi-Sincerity Microelectronics 

HI-SINCERITY

MICROELECTRONICS CORP.

Spec. No. : Preliminary Data

Issued Date : 1998.07.01

Revised Date : 1999.08.01

Page No. : 4/5

• Protection Diode

(The figure is shown as Regulator with Reverse Diode Protection in advanced applications)

In general operation, H1084E does not need any protection diodes. From the cross-section structure of

H1084E, the output pin is connected to P+ substrate, and the input pin is connected to N- well. There is a

parasitic reverse diode between them. It can handle microsecond surge currents of 50A to 100A. Even with large

output capacitance, it is very difficult to get those values of surge currents in normal operation. Only with high

value output capacitors, such as 1000uF. And with the input pin instantaneously shorted to ground. can damage

occur. A crowbar circuit at the input of the H1084E can generate those kinds of currents, and a diode from output

to input is recommended. Normal power supply cycling or even plugging and unplugging in the system will not

generate currents large enough to do any damage.

• Advanced Applications

Vin=7V

H 1084E

10uF 10uF

GND

1K

2K

GND

Vo=1.5~3.45

10uF

GND

Adjustable Output Voltage

H 1084E

Vin

*20m ohm

GND

10uF

GND

H 1084E

GND

*20m ohm

Vo

10uF

GND

Paralleling Regulators

*20m ohm is ballast resistance..

The inter - connection of #18 wire could act as ballast resistance.

H 1084E

V in

VO

1K

10uF

10uF

Zener Diode

or Voltage Reference

GND

GND

*Vo = Vref ( 1+R2/R1 ) + Iadj x R2

**Optional for improved ripple rejection.

Regulator with Reference

10uF

GND

H 1084E

Vin

Vo

10uF

GND

GND

100uF

GND

*Please refer to "protection diode section" for detailed description.

Regulator with Reverse Diode Protection

HSMC Product Specification

Share Link: