MC145190 View Datasheet(PDF) - Motorola => Freescale
Part Name
Description
View to exact match
MC145190 Datasheet PDF : 24 Pages
| |||
ELECTRICAL CHARACTERISTICS
(VDD = VCC = 4.5 to 5.5 V, Voltages Referenced to GND, TA = – 40 to + 85°C, unless otherwise stated;
MC145190: VPD = 8.0 to 9.5 V; MC145191: VPD = 4.5 to 5.5 V with VDD ≤ VPD.)
Symbol
Parameter
Test Condition
Guaranteed
Limit
Unit
VIL
VIH
Vhys
VOL
VOH
IOL
IOH
IOL
Maximum Low–Level Input Voltage
(Din, CLK, ENB, REFin)
Minimum High–Level Input Voltage
(Din, CLK, ENB, REFin)
Minimum Hysteresis Voltage (CLK, ENB)
Maximum Low–Level Output Voltage
(REFout, OUTPUT A)
Minimum High–Level Output Voltage
(REFout, OUTPUT A)
Minimum Low–Level Output Current
(REFout, LD, φR, φV)
Minimum High–Level Output Current
(REFout, LD, φR, φV)
Minimum Low–Level Output Current
(OUTPUT A, OUTPUT B)
Device in Reference Mode, dc Coupled
Device in Reference Mode, dc Coupled
Iout = 20 µA, Device in Reference Mode
Iout = –20 µA, Device in Reference Mode
Vout = 0.4 V
Vout = VDD – 0.4 V for REFout, LD
Vout = VPD – 0.4 V for φR, φV
Vout = 0.4 V
0.3 × VDD
V
0.7 × VDD
V
300
mV
0.1
V
VDD – 0.1 V
0.36
mA
– 0.36
mA
1.0
mA
IOH Minimum High–Level Output Current
(OUTPUT A, Only)
Vout = VDD – 0.4 V
– 0.6
mA
Iin Maximum Input Leakage Current
(Din, CLK, ENB, REFin)
Vin = VDD or GND, Device in XTAL Mode
± 1.0
µA
Iin Maximum Input Current
(REFin)
Vin = VDD or GND, Device in Reference Mode
± 150
µA
IOZ Maximum Output Leakage Current (PDout) Vout = VPD – 0.5 V or 0.5 V,
Output in High–Impedance State
MC145190
± 150
nA
MC145191
± 200
IOZ Maximum Output Leakage Current
Vout = VPD or GND,
(OUTPUT B) Output in High–Impedance State
± 10
µA
ISTBY Maximum Standby Supply Current
(VDD + VPD Pins)
Vin = VDD or GND; Outputs Open; Device in Standby
Mode, Shut–Down Crystal Mode or REFout–Static–Low
Reference Mode; OUTPUT B Controlling VCC per
Figure 22
30
µA
IPD Maximum Phase Detector
Quiescent Current (VPD Pin)
Bit C6 = High Which Selects Phase Detector A,
600
µA
PDout = Open, PDout = Static Low or High, Bit C4 = Low
Which is not Standby, IRx = 113 µA
Bit C6 = Low Which Selects Phase Detector B, φR and
30
φV = Open, φR and φV = Static Low or High, Bit
C4 = Low Which is not Standby
IT Total Operating Supply Current
(VDD + VPD + VCC Pins)
fin = 1.1 GHz; REFin = 13 MHz @ 1 V p–p;
OUTPUT A = Inactive and No Connect;
*
mA
REFout ÷ 8; φV, φR, PDout, LD = No Connect;
Din, ENB, CLK = VDD or GND, Phase Detector B Selected
(Bit C6 = Low)
* The nominal value = 7 mA. This is not a guaranteed limit.
MOTOROLA
MC145190•MC145191
3
|
|
Share Link: 