datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

BA00BC0WFP-E2 View Datasheet(PDF) - ROHM Semiconductor

Part NameDescriptionManufacturer
BA00BC0WFP-E2 1A Secondary LDO Regulators for Local Power Supplies ROHM
ROHM Semiconductor ROHM
BA00BC0WFP-E2 Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
BA□□BC0 Series,BA□□BC0W Series,BA00BC0W Series
Technical Note
Input / Output Equivalent Circuit Diagrams
Vcc
Vcc
CTL
27kΩ 2kΩ
31kΩ
Fig.16
R2
R1
Fig.17
* For the BA00BC0WT, connect R1 and
R2 externally between the C and GND
pins and between the OUT and C pins.
OUT
Equation: VOUT = Vc (R1 + R2) / R1
(Vc = 1.25 V (Typ.))
The recommended R1 value is
approximately 30 kto 150 k.
Thermal Derating Curves
TO220FP-3/TO220FP-5/TO220FP-5V5
25
(1) When using an infinite heat sink.
(1)20.0
20
j-c = 6.25 (°C/W)
(2) During IC without heat sink operation.
j-a = 62.5 (°C/W)
15
10
TO252-3/TO252-5
2.0
IC mounted on a ROHM standard board
1.6
1.30
Board size: 70 70 1.6 mm
Copper foil area: 7 7 mm
TO252-5 ja=96.2 (°C/W)
TO252-3 ja104.2 (°C/W)
1.2
TO252-5
0.8
5
(2)2.0
0
0
25 50 75 100 125 150
AMBIENT TEMPERATURETa [°C]
Fig.18
TO252-3
0.4
0
0
25 50 75 100 125 150
AMBIENT TEMPERATURETa [°C]
Fig.19
The characteristics of the IC are greatly influenced by the operating temperature. If the temperature exceeds the maximum
junction temperature Tjmax, deterioration or damage may occur. Implement proper thermal designs to ensure that power
dissipation is within the permissible range in order to prevent instantaneous damage resulting from heat and maintain the
reliability of the IC for long-term operation.
The following method is used to calculate the power consumption Pc (W).
Pc = (Vcc – Vo) Io + Vcc Icca
Power dissipation Pd Pc
The load current Io is calculated:
Vcc : Input voltage
Vo : Output current
IO : Load current
Icca : Circuit current
Io Pd Vcc Icca
Vcc Vo
Calculation Example:
Vcc = 6.0 V and Vo = 5.0 V at Ta = 85°C
0.676 6.0 Icca
6.0 5.0
ja = 96.2°C/W 10.4 mW/°C
25°C = 1300 mW 85°C = 676 mW
Io 550 mA (Icca 20 mA)
Refer to the above and implement proper thermal designs so that the IC will not be used under excessive power dissipation
conditions under the entire operating temperature range.
The power consumption Pc of the IC in the event of shorting (i.e. the Vo and GND pins are shorted) can be obtained from the
following equation:
Pc = Vcc (Icca + Ishort) (Ishort: short current).
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
5/8
2010.02 - Rev.B
Direct download click here
 

Share Link : ROHM
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]