datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ILX524KA View Datasheet(PDF) - Sony Semiconductor

Part Name
Description
View to exact match
ILX524KA Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
ILX524KA
Electrooptical Characteristics (Note 1)
Ta = 25°C, VDD = 12V, fφRS = 1MHz, Input clock = 5Vp-p, Light source = 3200K, IR cut filter CM-500S (t = 1.0mm)
Item
Symbol Min.
Typ. Max.
Unit Remarks
Red RR
1.3
2.0
2.7
Sensitivity
Green RG
2.1
3.2
4.3 V/(lx · s) Note 2
Blue RB
1.6
2.5
3.4
Sensitivity nonuniformity PRNU
4
20
%
Note 3
Saturation output voltage VSAT
2
3.2
V
Note 4
Saturation
exposure
Red SER
Green SEG
Blue SEB
0.74
1.6
0.46
1
lx · s Note 5
0.58
1.28
Dark voltage average
VDRK
0.3
2
mV Note 6
Dark signal nonuniformity DSNU
1.5
5
mV Note 6
Image lag
IL
0.02
%
Note 7
Supply current
IVDD
26
50
mA
Total transfer efficiency TTE
92
98
%
Output impedance
ZO
250
Offset level
VOS
6.5
V
Note 8
Dynamic range
DR
1000 10670 —
Note 9
Note
1) In accordance with the given electrooptical characteristics, the black level is defined as the average value
of D2, D3 to D12.
2) For the sensitivity test light is applied with a uniform intensity of illumination.
3) PRNU is defined as indicated below. Ray incidence conditions are the same as for Note 2.
VOUT-G = 500mV (Typ.)
PRNU =
(VMAX – VMIN) /2
VAVE
× 100 [%]
Where the 2700 pixels are divided into blocks of 100. The maximum output of each block is set to VMAX,
the minimum output to VMIN and the average output to VAVE.
4) Use below the minimum value of the saturation output voltage.
5) Saturation exposure is defined as follows.
SE = VSAT
R
Where R indicates RR, RG, RB, and SE indicates SER, SEG, SEB.
6) Optical signal accumulated time τint stands at 10ms.
7) VOUT-G = 500mV (Typ.)
VOUT
8) Vos is defined as indicated bellow.
VOUT indicates VOUT-R, VOUT-G, and VOUT-B.
9) Dynamic range is defined as follows.
VOS
DR = VSAT
VDRK
GND
When the optical signal accumulated time is shorter, the dynamic range gets wider because the optical
signal accumulated time is in proportion to the dark voltage.
–3–
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]