datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

AK4529 View Datasheet(PDF) - Asahi Kasei Microdevices

Part Name
Description
View to exact match
AK4529
AKM
Asahi Kasei Microdevices AKM
AK4529 Datasheet PDF : 38 Pages
First Prev 31 32 33 34 35 36 37 38
ASAHI KASEI
Digital Ground
System
Controller
[AK4529]
Analog Ground
1 SDOS
2 I2C
3 SMUTE
4 BICK
5 LRCK
6 SDTI1
7 SDTI2
8 SDTI3
9 SDTO
10 DAUX
11 DFS
AK4529
DZF2/OVF 33
RIN 32
LIN 31
NC 30
NC 29
ROUT1 28
LOUT1 27
ROUT2 26
LOUT2 25
ROUT3 24
LOUT3 23
Figure 21. Ground Layout
Note: AVSS and DVSS must be connected to the same analog ground plane.
1. Grounding and Power Supply Decoupling
The AK4529 requires careful attention to power supply and grounding arrangements. AVDD and DVDD are usually
supplied from analog supply in system. Alternatively if AVDD and DVDD are supplied separately, the power up
sequence is not critical. AVSS and DVSS of the AK4529 must be connected to analog ground plane. System analog
ground and digital ground should be connected together near to where the supplies are brought onto the printed circuit
board. Decoupling capacitors should be as near to the AK4529 as possible, with the small value ceramic capacitor being
the nearest.
2. Voltage Reference Inputs
The voltage of VREFH sets the analog input/output range. VREFH pin is normally connected to AVDD with a 0.1µF
ceramic capacitor. VCOM is a signal ground of this chip. An electrolytic capacitor 2.2µF parallel with a 0.1µF ceramic
capacitor attached to VCOM pin eliminates the effects of high frequency noise. No load current may be drawn from
VCOM pin. All signals, especially clocks, should be kept away from the VREFH and VCOM pins in order to avoid
unwanted coupling into the AK4529.
3. Analog Inputs
ADC inputs are single-ended and internally biased to VCOM. The input signal range scales with the supply voltage and
nominally 0.62 x VREFH Vpp (typ)@fs=44.1kHz. The ADC output data format 2’s compliment. The DC offset is
removed by the internal HPF.
The AK4529 samples the analog inputs at 64fs. The digital filter rejects noise above the stop band except for multiples of
64fs. The AK4529 includes an anti-aliasing filter (RC filter) to attenuate a noise around 64fs.
MS0082-E-00
- 34 -
2001/3
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]