datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

AK4529 View Datasheet(PDF) - Asahi Kasei Microdevices

Part NameDescriptionManufacturer
AK4529 High Performance Multi-channel Audio CODEC AKM
Asahi Kasei Microdevices AKM
AK4529 Datasheet PDF : 38 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
ASAHI KASEI
[AK4529]
n Serial Control Interface
The AK4529 can control its functions via registers. Internal registers may be written by 2 types of control mode. The chip
address is determined by the state of the CAD0 and CAD1 inputs. PDN = “L” initializes the registers to their default
values. Writing “0” to the RSTN bit can initialize the internal timing circuit. But in this case, the register data is not be
initialized. When the state of P/S pin is changed, the AK4529 should be reset by PDN pin.
* Writing to control register is invalid when PDN = “L” or the MCLK is not fed.
* AK4529 does not support the read command.
(1) 3-wire Serial Control Mode (I2C = “L”)
Internal registers may be written to the 3 wire µP interface pins (CSN, CCLK and CDTI). The data on this interface
consists of Chip address (2bits, CAD0/1), Read/Write (1bit, Fixed to “1”, Write only), Register address (MSB first,
5bits) and Control data (MSB first, 8bits). Address and data is clocked in on the rising edge of CCLK and data is
clocked out on the falling edge. For write operations, data is latched after a low-to-high transition of CSN. The clock
speed of CCLK is 5MHz(max). The CSN pin should be held to “H” except for access.
CSN
CCLK
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CDTI
C1 C0 R/W A4 A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0
C1-C0: Chip Address (C1=CAD1, C0=CAD0)
R/W: Read/Write (Fixed to “1”, Write only)
A4-A0: Register Address
D7-D0: Control Data
Figure 12. 3-wire Serial Control I/F Timing
MS0082-E-00
- 25 -
2001/3
Direct download click here

 

Share Link : 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]