ADV7188 View Datasheet(PDF) - Analog Devices
Part Name
Description
View to exact match
ADV7188 Datasheet PDF : 112 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
Table 6.
Parameter
AVDD to AGND
DVDD to DGND
PVDD to AGND
DVDDIO to DGND
DVDDIO to AVDD
PVDD to DVDD
DVDDIO to PVDD
DVDDIO to DVDD
AVDD to PVDD
AVDD to DVDD
Digital Inputs Voltage to DGND
Digital Output Voltage to DGND
Analog Inputs to AGND
Maximum Junction Temperature
(TJ max)
Storage Temperature Range
Infrared Reflow Soldering (20 sec)
Rating
4V
2.2 V
2.2 V
4V
−0.3 V to +0.3 V
−0.3 V to +0.3 V
−0.3 V to +2 V
−0.3 V to +2 V
−0.3 V to +2 V
−0.3 V to +2 V
−0.3 V to DVDDIO + 0.3 V
−0.3 V to DVDDIO + 0.3 V
AGND − 0.3 V to AVDD + 0.3 V
125°C
−65°C to +150°C
260°C
ADV7188
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
PACKAGE THERMAL PERFORMANCE
To reduce power consumption the user is advised to turn off
any unused ADCs when using the part.
The junction temperature must always stay below the
maximum junction temperature (TJ max) of 125°C. Use the
following equation to calculate the junction temperature:
TJ = TA max + (θJA × Wmax)
where:
TA max = 85°C.
θJA = 30°C/W.
Wmax = ((AVDD × IAVDD) + ( DVDD × IDVDD) + (DVDDIO × IDVDDIO) +
(PVDD × IPVDD)).
ESD CAUTION
Rev. A | Page 9 of 112
|
|
Share Link: 