datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADV7184BSTZ View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADV7184BSTZ Datasheet PDF : 108 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADV7184
ELECTRICAL CHARACTERISTICS
At AVDD = 3.15 V to 3.45 V, DVDD = 1.65 V to 2.0 V, DVDDIO = 3.0 V to 3.6 V, PVDD = 1.71 V to 1.89 V, nominal input range 1.6 V.
Operating temperature range, unless otherwise noted.
Table 1.
Parameter
Symbol Test Conditions
Min Typ
Max
Unit
STATIC PERFORMANCE1, 2, 3
Resolution (Each ADC)
N
10
Bits
Integral Nonlinearity
INL
BSL at 54 MHz
–0.6/+0.7
±3
LSB
Differential Nonlinearity
DNL
BSL at 54 MHz
−0.5/+0.5
-0.99/2.5
LSB
DIGITAL INPUTS
Input High Voltage4
VIH
Input Low Voltage5
VIL
2
V
0.8
V
Input Current
IIN
Pins listed in Note 6
–50
All other pins7
–10
+50
μA
+10
μA
Input Capacitance9
CIN
10
pF
DIGITAL OUTPUTS
Output High Voltage8
Output Low Voltage8
VOH
ISOURCE = 0.4 mA
2.4
VOL
ISINK = 3.2 mA
V
0.4
V
High Impedance Leakage Current
ILEAK
Output Capacitance9
COUT
POWER REQUIREMENTS9
10
μA
20
pF
Digital Core Power Supply
DVDD
1.65 1.8
2
V
Digital I/O Power Supply
DVDDIO
3.0 3.3
3.6
V
PLL Power Supply
PVDD
1.71 1.8
1.89
V
Analog Power Supply
AVDD
3.15 3.3
3.45
V
Digital Core Supply Current
IDVDD
105
mA
Digital I/O Supply Current
IDVDDIO
4
mA
PLL Supply Current
IPVDD
11
mA
Analog Supply Current
IAVDD
CVBS input10
99
mA
YPrPb input11
269
mA
Power-Down Current
IPWRDN
0.65
mA
Power-Up Time
tPWRUP
20
ms
1 All ADC linearity tests performed at input range of full scale – 12.5%, and at zero scale +12.5%.
2 Max INL and DNL specifications obtained with part configured for component video input.
3 Temperature range TMIN to TMAX, –40°C to +85°C. The min/max specifications are guaranteed over this range.
4 To obtain specified VIH level on Pin 29, Register 0x13 (write only) must be programmed with value 0x04. If Register 0x13 is programmed with value 0x00, then VIH on
Pin 29 = 1.2 V.
5 To obtain specified VIL level on Pin 29, Register 0x13 (write only) must be programmed with value 0x04. If Register 0x13 is programmed with value 0x00, then VIL on
Pin 29 = 0.4 V.
6 Pins: 36 and 79.
7 Excluding all “TEST” pins (TEST0 to TEST12)
8 VOH and VOL levels obtained using default drive strength value (0xD5) in register subaddress 0xF4.
9 Guaranteed by characterization.
10 ADC0 powered on only.
11 All four ADCs powered on.
Rev. 0 | Page 5 of 108
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]