datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADV7181WBCPZ View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADV7181WBCPZ Datasheet PDF : 20 Pages
First Prev 11 12 13 14 15 16 17 18 19 20
DETAILED FUNCTIONALITY
ANALOG FRONT END
The analog front-end section contains four high quality 10-bit
ADCs, and the six analog input channel mux enables multisource
connection without the requirement of an external mux. It also
contains
Four current and voltage clamp control loops to ensure
that any dc offsets are removed from the video signal
SCART functionality and SD RGB overlay on CVBS that
are controlled by fast blank input
Four internal antialias filters to remove out-of-band noise
on standard definition input video signals
SDP PIXEL DATA OUTPUT MODES
8-/10-bit ITU-R BT.656 4:2:2 YCrCb with embedded time
codes and/or HS, S, and FIELD
16-/20-bit YCrCb with embedded time codes and/or HS,
VS, and FIELD
CP PIXEL DATA OUTPUT MODES
CP pixel data output modes include single data rate (SDR) and
double data rate (DDR) as follows:
SDR 8-/10-bit 4:2:2 YCrCb for 525i, 625i
SDR 16-/20-bit 4:2:2 YCrCb for all standards
DDR 8-/10-bit 4:2:2 YCrCb for all standards
DDR 12-bit 4:4:4 RGB for graphics inputs
ADV7181C
COMPOSITE AND S-VIDEO PROCESSING
Composite and S-Video processing features offer support for
NTSC M/J, NTSC 4.43, PAL B/D/I/G/H, PAL60, PAL M, PAL
N, and SECAM (B, D, G, K, and L) standards in the form of
CVBS and S-Video as well as super-adaptive, 2D, 5-line comb
filters for NTSC and PAL give superior chrominance and
luminance separation for composite video. They also include
full automatic detection and autoswitching of all worldwide
standards (PAL, NTSC, and SECAM) and automatic gain
control with white peak mode to ensure the video is always
processed without loss of the video processing range. Other
features are
Adaptive Digital Line Length Tracking (ADLLT™)
Proprietary architecture for locking to weak, noisy, and
unstable sources from VCRs and tuners
IF filter block to compensate for high frequency luma
attenuation due to tuner SAW filter
Chroma transient improvement (CTI)
Luminance digital noise reduction (DNR)
Color controls including hue, brightness, saturation,
contrast, and Cr and Cb offset controls
Certified Macrovision® copy protection detection on
composite and S-Video for all worldwide formats
(PAL/NTSC/SECAM)
4× oversampling (54 MHz) for CVBS, S-Video, and
YUV modes
Line-locked clock output (LLC)
Letterbox detection support
Free-run output mode to provide stable timing when no
video input is present
Vertical blanking interval data processor, including teletext,
video programming system (VPS), vertical interval time
codes (VITC), closed captioning (CC) and extended data
service (EDS), wide screen signaling (WSS), copy genera-
tion management system (CGMS), and compatibility with
GemStar™ 1×/2× electronic program guide
Clocked from a single 28.63636 MHz crystal
Subcarrier frequency lock (SFL) output for downstream
video encoder
Differential gain typically 0.5%
Differential phase typically 0.5°
Rev. 0 | Page 11 of 20
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]