datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADV7180KST48Z View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADV7180KST48Z
ADI
Analog Devices ADI
ADV7180KST48Z Datasheet PDF : 120 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
Data Sheet
ANTIALIASING FILTERS
The ADV7180 has optional on-chip antialiasing (AA) filters on
each of the three channels that are multiplexed to the ADC (see
Figure 15). The filters are designed for standard definition video
up to 10 MHz bandwidth. Figure 16 and Figure 17 show the
filter magnitude and phase characteristics.
The antialiasing filters are enabled by default and the selection
of INSEL[3:0] determines which filters are powered up at any
given time. For example, if CVBS mode is selected, the filter
circuits for the remaining input channels are powered down to
conserve power. However, the antialiasing filters can be disabled
or bypassed using the AA_FILT_MAN_OVR control.
AIN1
AIN2
AIN3
AIN41
AIN51
AIN61
AA
FILTER 1
AA
FILTER 2
AA
FILTER 3
10-BIT, 86MHz
ADC
SHA
A/D
1ONLY AVAILABLE IN 64-LEAD AND 48-LEAD PACKAGES.
Figure 15. Antialias Filter Configuration
AA_FILT_MAN_OVR, Antialiasing Filter Override,
Address 0xF3[3]
This feature allows the user to override the antialiasing filters
on/off settings, which are automatically selected by INSEL[3:0].
AA_FILT_EN, Antialiasing Filter Enable, Address 0xF3[2:0]
These bits allow the user to enable or disable the antialiasing
filters on each of the three input channels multiplexed to the
ADC. When disabled, the analog signal bypasses the AA filter
and is routed directly to the ADC.
AA_FILT_EN, Address 0xF3[0]
When AA_FILT_EN[0] is 0, AA Filter 1 is bypassed.
When AA_FILT_EN[0] is 1, AA Filter 1 is enabled.
ADV7180
AA_FILT_EN, Address 0xF3[1]
When AA_FILT_EN[1] is 0, AA Filter 2 is bypassed.
When AA_FILT_EN[1] is 1, AA Filter 2 is enabled.
AA_FILT_EN, Address 0xF3[2]
When AA_FILT_EN[2] is 0, AA Filter 3 is bypassed.
When AA_FILT_EN[2] is 1, AA Filter 3 is enabled.
0
–4
–8
–12
–16
–20
–24
–28
–32
–36
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 16. Antialiasing Filter Magnitude Response
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–110
–120
–130
–140
–150
1k
10k
100k
1M
10M
FREQUENCY (Hz)
Figure 17. Antialiasing Filter Phase Response
100M
100M
Rev. G | Page 21 of 120
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]