datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADV7171WBSZ-REEL View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADV7171WBSZ-REEL Datasheet PDF : 64 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADV7170/ADV7171
VAA = 3.0 V to 3.6 V1, VREF = 1.235 V, RSET = 150 Ω. All specifications TMIN to TMAX2, unless otherwise noted.
Table 2.
Parameter
STATIC PERFORMANCE3
Resolution (Each DAC)
Accuracy (Each DAC)
Integral Nonlinearity
Differential Nonlinearity
DIGITAL INPUTS3
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IIN3, 4
Input Capacitance, CIN
DIGITAL OUTPUTS3
Output High Voltage, VOH
Output Low Voltage, VOL
Three-State Leakage Current
Three-State Output Capacitance
ANALOG OUTPUTS3
Output Current4, 5
Output Current6
DAC-to-DAC Matching
Output Compliance, VOC
Output Impedance, ROUT
Output Capacitance, COUT
POWER REQUIREMENTS3, 7
VAA
Normal Power Mode
IDAC (max)8
IDAC (min)8
ICCT 9
Low Power Mode
IDAC (max)8
IDAC (min)8
ICCT9
Sleep Mode
IDAC 10
ICCT 11
Power Supply Rejection Ratio
Conditions1
RSET = 300 Ω
Guaranteed monotonic
VIN = 0.4 V or 2.4 V
ISOURCE = 400 μA
ISINK = 3.2 mA
RSET = 150 Ω, RL = 37.5 Ω
RSET = 1041 Ω, RL = 262.5 Ω
IOUT = 0 mA
RSET = 150 Ω, RL = 37.5 Ω
RSET = 1041 Ω, RL = 262.5 Ω
COMP = 0.1 μF
Min Typ
±0.6
2
10
2.4
10
33
34.7
5
2.0
0
30
3.0
3.3
150
20
35
80
20
35
0.1
0.001
0.01
Max Unit
10
Bits
LSB
±1
LSB
V
0.8
V
±1
μA
pF
V
0.4
V
10
μA
pF
37
mA
mA
%
1.4
V
30
pF
3.6
V
155
mA
mA
mA
mA
mA
mA
μA
μA
0.5
%/%
1 The min/max specifications are guaranteed over this range. The min/max values are typical over 3.0 V to 3.6 V.
2 Ambient temperature range TMIN to TMAX: −40°C to +85°C. The die temperature, TJ, must always be kept below 110°C.
3 Guaranteed by characterization.
4 Full drive into 37.5 Ω load.
5 DACs can output 35 mA typically at 3.3 V (RSET = 150 Ω and RL = 37.5 Ω); optimum performance obtained at 18 mA DAC current (RSET = 300 Ω and RL = 75 Ω).
6 Minimum drive current (used with buffered/scaled output load).
7 Power measurements are taken with clock frequency = 27 MHz. Max TJ = 110°C.
8 IDAC is the total current (min corresponds to 5 mA output per DAC, max corresponds to 38 mA output per DAC) to drive all four DACs. Turning off individual DACs
reduces IDAC correspondingly.
9 ICCT (circuit current) is the continuous current required to drive the device.
10 Total DAC current in sleep mode.
11 Total continuous current during sleep mode.
Rev. C | Page 5 of 64
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]