datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :

ADP121CB-2.5-EVALZ View Datasheet(PDF) - Analog Devices

Part NameADP121CB-2.5-EVALZ ADI
Analog Devices ADI
Description150 mA, Low Quiescent Current, CMOS Linear Regulator
ADP121CB-2.5-EVALZ Datasheet PDF : 20 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Data Sheet
FEATURES
Input voltage range: 2.3 V to 5.5 V
Output voltage range: 1.2 V to 3.3 V
Output current: 150 mA
Low quiescent current
IGND = 11 μA with 0 μA load
IGND = 30 μA with 150 mA load
Low shutdown current: <1 μA
Low dropout voltage
90 mV @ 150 mA load
High PSRR
70 dB @ 1 kHz at VOUT = 1.2 V
70 dB @ 10 kHz at VOUT = 1.2 V
Low noise: 40 μV rms at VOUT = 1.2 V
No noise bypass capacitor required
Output voltage accuracy: ±1%
Stable with a small 1 μF ceramic output capacitor
Current limit and thermal overload protection
Logic controlled enable
5-lead TSOT package
4-ball 0.4 mm pitch WLCSP
APPLICATIONS
Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
Post dc-to-dc regulation
Post regulation
GENERAL DESCRIPTION
The ADP121 is a quiescent current, low dropout, linear regulator
that operates from 2.3 V to 5.5 V and provides up to 150 mA of
output current. The low 135 mV dropout voltage at 150 mA
load improves efficiency and allows operation over a wide
input voltage range. The low 30 μA of quiescent current at full
load makes the ADP121 ideal for battery-operated portable
equipment.
150 mA, Low Quiescent Current,
CMOS Linear Regulator
ADP121
TYPICAL APPLICATION CIRCUITS
VIN = 2.3V
CIN
1µF
1 VIN VOUT 5
VOUT = 1.8V
2 GND
COUT
1µF
ON 3 EN
NC 4
OFF
NC = NO CONNECT
Figure 1. ADP121 TSOT with Fixed Output Voltage, 1.8 V
VIN = 2.3V
CIN
1µF
VOUT = 1.8V
VIN
VOUT
COUT
1µF
ON
EN
OFF
GND
Figure 2. ADP121 WLCSP with Fixed Output Voltage, 1.8 V
The ADP121 is available in output voltages ranging from 1.2 V
to 3.3 V. The parts are optimized for stable operation with small
1 μF ceramic output capacitors. The ADP121 delivers good
transient performance with minimal board area.
Short-circuit protection and thermal overload protection circuits
prevent damage in adverse conditions. The ADP121 is available
in a tiny 5-lead TSOT and 4-ball 0.4 mm pitch halide-free
WLCSP packages and utilizes the smallest footprint solution to
meet a variety of portable applications.
Rev. G
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2008–2012 Analog Devices, Inc. All rights reserved.
Direct download click here
 

GENERAL DESCRIPTION
The ADP121 is a quiescent current, low dropout, linear regulator that operates from 2.3 V to 5.5 V and provides up to 150 mA of output current. The low 135 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range. The low 30 μA of quiescent current at full load makes the ADP121 ideal for battery-operated portable equipment.
The ADP121 is available in output voltages ranging from 1.2 V to 3.3 V. The parts are optimized for stable operation with small 1 μF ceramic output capacitors. The ADP121 delivers good transient performance with minimal board area.
Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. The ADP121 is available in a tiny 5-lead TSOT and 4-ball 0.4 mm pitch halide-free WLCSP packages and utilizes the smallest footprint solution to meet a variety of portable applications.

FEATURES
  Input voltage range: 2.3 V to 5.5 V
  Output voltage range: 1.2 V to 3.3 V
  Output current: 150 mA
  Low quiescent current
     IGND = 11 μA with 0 μA load
     IGND = 30 μA with 150 mA load
  Low shutdown current: <1 μA
  Low dropout voltage
     90 mV @ 150 mA load
  High PSRR
     70 dB @ 1 kHz at VOUT = 1.2 V
     70 dB @ 10 kHz at VOUT = 1.2 V
  Low noise: 40 μV rms at VOUT = 1.2 V
  No noise bypass capacitor required
  Output voltage accuracy: ±1%
  Stable with a small 1 μF ceramic output capacitor
  Current limit and thermal overload protection
  Logic controlled enable
  5-lead TSOT package
  4-ball 0.4 mm pitch WLCSP
 
APPLICATIONS
  Mobile phones
  Digital cameras and audio devices
  Portable and battery-powered equipment
  Post dc-to-dc regulation
  Post regulation

Share Link : ADI
@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]