datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADP1043AACPZ-RL View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADP1043AACPZ-RL Datasheet PDF : 72 Pages
First Prev 31 32 33 34 35 36 37 38 39 40 Next Last
ADP1043A
EEPROM Password Lock
The EEPROM password prevents the EEPROM contents from
being changed accidentally or purposely by an unwanted source.
The password ensures that critical specifications such as OVP
and OCP cannot be changed.
The EEPROM is always locked. When the EEPROM downloads
its contents to the registers, the password is also downloaded. If
the user writes the same password to Register 0x5E twice, the
EEPROM is unlocked and can be updated.
While the EEPROM is unlocked, it is possible to change the
password by writing a new value to Register 0x5E. After this
value is updated, the EEPROM contains the new password. The
factory default password is 0x00.
To update the EEPROM password, the user must write to
Register 0x7B. Writing 0x00 to this register updates the
EEPROM. The user must wait at least 50 ms after this write
command before attempting any further communication
with the ADP1043A.
Note that the EEPROM should not be written to for the first
500 ms after VDD has been applied.
EEPROM Password Change
To change the EEPROM password, follow these steps:
1. Write the old password to Register 0x5E (password lock
register).
2. Write the new password to Register 0x5E (password lock
register) for the first time.
3. Write the new password to Register 0x5E (password lock
register) for the second time.
4. Write the new password to Register 0x5E (password lock
register) for the third time.
5. Write 0x00 to Register 0x7B.
6. Wait 50 ms.
7. To lock the EEPROM, write any value other than the
password value into Register 0x5E.
Cyclic Redundancy Check (CRC)
The ADP1043A performs a check to ensure that the EEPROM
contents are correctly downloaded to registers at startup. It
compares the total number of 1s downloaded with the total
number of 1s that were last written to the EEPROM. If there is
a discrepancy, the CRC fault flag is set in Register 0x03, Bit 1.
This flag is used to ensure that the correct data is downloaded
from the EEPROM to the registers at startup.
SOFTWARE GUI
A free software GUI is available for programming and configu-
ring the ADP1043A. The GUI is designed to be intuitive to
power supply designers and dramatically reduces power supply
design and development time. The software includes filter
design and power supply PWM topology windows. The GUI is
also an information center, displaying the status of all readings,
monitoring, and flags on the ADP1043A.
For more information about the GUI, contact Analog Devices
for the latest software and a user guide. Evaluation boards are
also available by contacting Analog Devices.
To download the latest GUI, click on the About button at the
top of the GUI Main screen. Click on the link to check for GUI
updates.
Rev. 0 | Page 32 of 72
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]