datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADF4156BCPZ-RL7 View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADF4156BCPZ-RL7
ADI
Analog Devices ADI
ADF4156BCPZ-RL7 Datasheet PDF : 24 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADF4156
CIRCUIT DESCRIPTION
REFERENCE INPUT SECTION
The reference input stage is shown in Figure 11. SW1 and SW2
are normally closed switches. SW3 is normally open. When
power-down is initiated, SW3 is closed and SW1 and SW2 are
opened. This ensures that there is no loading of the REFIN pin
on power-down.
POWER-DOWN
CONTROL
NC 100k
REFIN NC
SW2
SW1
SW3
NO
TO R COUNTER
BUFFER
Figure 11. Reference Input Stage
RF INPUT STAGE
The RF input stage is shown in Figure 12. It is followed by a
2-stage limiting amplifier to generate the current-mode logic
(CML) clock levels needed for the prescaler.
BIAS
GENERATOR
1.6V
2k
2k
AVDD
RFINA
RFINB
Figure 12. RF Input Stage
AGND
RF INT DIVIDER
The RF INT counter allows a division ratio in the PLL feedback
counter. Division ratios from 23 to 4095 are allowed.
INT, FRAC, MOD, AND R RELATIONSHIP
The INT, FRAC, and MOD values, in conjunction with the
R counter, make it possible to generate output frequencies that
are spaced by fractions of the phase frequency detector (PFD).
See the RF Synthesizer: A Worked Example section for more
information. The RF VCO frequency (RFOUT) equation is
RFOUT = FPFD × (INT + (FRAC/MOD))
(1)
where RFOUT is the output frequency of external voltage
controlled oscillator (VCO).
FPFD = REFIN × [(1 + D)/(R × (1 + T))]
(2)
where:
REFIN is the reference input frequency.
D is the REFIN doubler bit.
T is the REFIN divide-by-2 bit (0 or 1).
R is the preset divide ratio of binary 5-bit programmable
reference counter (1 to 32).
INT is the preset divide ratio of binary 12-bit counter
(23 to 4095).
MOD is the preset fractional modulus (2 to 4095).
FRAC is the numerator of the fractional division (0 to MOD−1).
RF N DIVIDER
FROM RF
INPUT STAGE
N COUNTER
N = INT + FRAC/MOD
TO PFD
THIRD ORDER
FRACTIONAL
INTERPOLATOR
INT
REG
MOD
REG
FRAC
VALUE
Figure 13. RF INT Divider
RF R COUNTER
The 5-bit RF R counter allows the input reference frequency
(REFIN) to be divided down to produce the reference clock to
the PFD. Division ratios from 1 to 32 are allowed.
Rev. 0 | Page 8 of 24
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]