ADDAC87-CBIV883 View Datasheet(PDF) - Analog Devices

Part Name

Description

View to exact match

ADDAC87-CBIV883

Complete Low Cost 12-Bit D/A Converters

Analog Devices 

ADDAC80/ADDAC85/ADDAC87

OUTLINE DIMENSIONS

Dimensions shown in inches and (mm).

24-Lead Side Brazed Ceramic DIP for Hybrid (DH-24A)

SEE NOTE 5

0.005 (0.13) MIN

0.098 (2.49) MAX

24

13

PIN 1

SEE NOTE 1

1

12 SEE NOTE 3

1.212 (29.69) MAX

0.075 (1.91)

0.015 (0.38)

0.225 (5.72)

MAX

0.200 (5.08)

0.120 (3.05)

0.023 (0.58)

0.014 (0.36)

0.100 (2.54) 0.070 (1.78)

BSC 0.030 (0.76)

0.180

(4.57)

MIN

SEATING

PLANE

SEE NOTE 4, 7 SEE NOTE 2

0.600 (14.70)

0.580 (14.21)

0.015 (0.38)

0.008 (0.20)

0.620 (15.75)

0.590 (14.99)

SEE NOTE 6

NOTES

1. INDEX AREA; A NOTCH OR A LEAD ONE IDENTIFICATION MARK IS LOCATED ADJACENT TO LEAD ONE.

2. THE MINIMUM LIMIT FOR DIMENSION MAY BE 0.023" (0.58 mm) FOR ALL FOUR CORNER LEADS ONLY.

3. DIMENSION SHALL BE MEASURED FROM THE SEATING PLANE TO THE BASE PLANE.

4. THE BASIC PIN SPACING IS 0.100" (2.54 mm) BETWEEN CENTERLINES.

5. APPLIES TO ALL FOUR CORNERS.

6. SHALL BE MEASURED AT THE CENTERLINE OF THE LEADS.

7. TWENTY TWO SPACES.

8. CONTROLLING DIMENSIONS ARE IN MILLIMETERS: INCH DIMENSIONS ARE ROUNDED-OFF MILLIMETER

EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.

–14–

REV. B

Share Link: