datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

ADC0802LCWM View Datasheet(PDF) - National ->Texas Instruments

Part NameDescriptionManufacturer
ADC0802LCWM 8-Bit µP Compatible A/D Converters National-Semiconductor
National ->Texas Instruments National-Semiconductor
ADC0802LCWM Datasheet PDF : 41 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
AC Electrical Characteristics (Continued)
Note 7: The CS input is assumed to bracket the WR strobe input and therefore timing is dependent on the WR pulse width. An arbitrarily wide pulse width will hold
the converter in a reset mode and the start of conversion is initiated by the low to high transition of the WR pulse (see timing diagrams).
Note 8: None of these A/Ds requires a zero adjust (see section 2.5.1). To obtain zero code at other analog input voltages see section 2.5 and Figure 7.
Note 9: The VREF/2 pin is the center point of a two-resistor divider connected from VCC to ground. In all versions of the ADC0801, ADC0802, ADC0803, and
ADC0805, and in the ADC0804LCJ, each resistor is typically 16 k. In all versions of the ADC0804 except the ADC0804LCJ, each resistor is typically 2.2 k.
Note 10: Human body model, 100 pF discharged through a 1.5 kresistor.
Typical Performance Characteristics
Logic Input Threshold Voltage
vs. Supply Voltage
Delay From Falling Edge of
RD to Output Data Valid
vs. Load Capacitance
CLK IN Schmitt Trip Levels
vs. Supply Voltage
DS005671-38
fCLK vs. Clock Capacitor
Full-Scale Error vs
Conversion Time
DS005671-39
DS005671-40
Effect of Unadjusted Offset Error
vs. VREF/2 Voltage
Output Current vs
Temperature
DS005671-41
DS005671-42
Power Supply Current
vs Temperature (Note 9)
DS005671-43
Linearity Error at Low
VREF/2 Voltages
DS005671-44
DS005671-45
5
DS005671-46
www.national.com
Direct download click here
 

Share Link : National-Semiconductor
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]