datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

ADC0809CCNX View Datasheet(PDF) - National ->Texas Instruments

Part NameDescriptionManufacturer
ADC0809CCNX 8-Bit µP Compatible A/D Converters with 8-Channel Multiplexer National-Semiconductor
National ->Texas Instruments National-Semiconductor
ADC0809CCNX Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Typical Performance Characteristics
DS005672-16
FIGURE 6. Comparator IIN vs VIN
(VCC=VREF=5V)
DS005672-17
FIGURE 7. Multiplexer RON vs VIN
(VCC=VREF=5V)
TRI-STATE Test Circuits and Timing Diagrams
t1H, tH1
t1H, CL = 10 pF
tH1, CL = 50 pF
t0H, tH0
DS005672-18
t0H, CL = 10 pF
DS005672-19
DS005672-20
tH0, CL = 50 pF
DS005672-21
DS005672-22
DS005672-23
FIGURE 8.
Applications Information
OPERATION
1.0 RATIOMETRIC CONVERSION
The ADC0808, ADC0809 is designed as a complete Data
Acquisition System (DAS) for ratiometric conversion sys-
tems. In ratiometric systems, the physical variable being
measured is expressed as a percentage of full-scale which is
not necessarily related to an absolute standard. The voltage
input to the ADC0808 is expressed by the equation
(1)
VIN=Input voltage into the ADC0808
Vfs=Full-scale voltage
VZ=Zero voltage
DX=Data point being measured
DMAX=Maximum data limit
DMIN=Minimum data limit
A good example of a ratiometric transducer is a potentiom-
eter used as a position sensor. The position of the wiper is di-
rectly proportional to the output voltage which is a ratio of the
full-scale voltage across it. Since the data is represented as
a proportion of full-scale, reference requirements are greatly
reduced, eliminating a large source of error and cost for
many applications. A major advantage of the ADC0808,
ADC0809 is that the input voltage range is equal to the sup-
ply range so the transducers can be connected directly
across the supply and their outputs connected directly into
the multiplexer inputs, (Figure 9).
Ratiometric transducers such as potentiometers, strain
gauges, thermistor bridges, pressure transducers, etc., are
suitable for measuring proportional relationships; however,
many types of measurements must be referred to an abso-
lute standard such as voltage or current. This means a sys-
www.national.com
8
Direct download click here
 

Share Link : National-Semiconductor
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]