Pin No. Mnemonic
Heat Sink Pad
Clock Input for Serial Port in SPI Mode.
Clock mode. In pin mode, CLKMD determines phase of internal retiming clock.
DCLKIO = CLKIN: Tie to 0.
DCLKIO ≠ CLKIN: Pulse 0 to 1 to edge trigger the internal retimer (see the Retimer section).
Bidirectional Data Line for Serial Port in SPI mode.
Data Format. In pin mode, FORMAT determines data format of digital data.
Active Low Chip Select in SPI Mode.
Power Down. In pin mode, PWRDN powers down the device except for the SPI port.
Digital Input (MSB).
The heat sink pad is connected to AVSS and must be soldered to the ground plane. Exposed metal at package
corners is connected to this pad.
Rev. 0 | Page 10 of 48