datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

AC01 View Datasheet(PDF) - Philips Electronics

Part Name
Description
View to exact match
AC01
Philips
Philips Electronics Philips
AC01 Datasheet PDF : 24 Pages
First Prev 21 22 23 24
BCcomponents
Cemented wirewound resistors
Product specification
AC01/03/04/05/07/10/15/20
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
schedule of IEC publications 60115-1 and 60115-4,
category 40/200/56 (rated temperature range 40 °C to
+200 °C; damp heat, long term, 56 days). The testing also
covers the requirements specified by EIA and EIAJ.
The tests are carried out in accordance with IEC publication
60 068, Recommended basic climatic and mechanical
robustness testing procedure for electronic components
and under standard atmospheric conditions according to
IEC 60 068-1, subclause 5.3.
In Table 5 the tests and requirements are listed with
reference to the relevant clauses of
IEC publications 60115-1, 115-4 and 68; a short
description of the test procedure is also given. In some
instances deviations from the IEC recommendations were
necessary for our method of specifying.
All soldering tests are performed with mildly activated flux.
Table 5 Test procedures and requirements
IEC
60 115-1
CLAUSE
IEC
60 068
TEST
METHOD
TEST
PROCEDURE
Tests in accordance with the schedule of IEC publication 60115-1
4.15
robustness of
resistor body
load 200 ±10 N
load
R = 6 mm
MBB179
REQUIREMENTS
no visible damage
R/R max.: ±0.5% + 0.05
4.16
4.17
4.18
4.19
4.22
4.20
U
Ua
Ub
Uc
Ta
Tb
14 (Na)
Fc
Eb
robustness of
terminations:
tensile all samples
bending half
number of samples
torsion other half of
samples
solderability
resistance to soldering
heat
rapid change of
temperature
vibration
bump
load 10 N; 10 s
load 5 N 90°, 180°, 90°
2 × 180° in opposite directions
2 s; 235 °C; flux 600
thermal shock: 3 s; 350 °C;
2.5 mm from body
30 minutes at 40 °C and
30 minutes at +200 °C; 5 cycles
frequency 10 to 500 Hz; displacement
0.75 mm or acceleration 10 g;
3 directions; total 6 hours (3 × 2 hours)
4000 ±10 bumps; 390 m/s2
no visible damage
R/R max.: ±0.5% + 0.05
good tinning; no damage
R/R max.: ±0.5% + 0.05
no visible damage
R/R max.: ±1% + 0.05
no damage
R/R max.: ±0.5% + 0.05
no damage
R/R max.: ±0.5% + 0.05
2000 Oct 20
23
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]