88E1111 View Datasheet(PDF) - Marvell Semiconductor
Part Name
Description
View to exact match
88E1111 Datasheet PDF : 52 Pages
| |||
Signal Description
Pin Description
Table 2: GMII/MII Interfaces (Continued)
117-TFBGA 96-BCC
Pin #
Pin #
J2
20
J1
19
H3
18
H1
17
H2
16
G3
14
G2
12
F1
11
128-PQFP Pin Name
Pin #
29
TXD[7]
28
TXD[6]
26
TXD[5]
25
TXD[4]
24
TXD[3]/TXD[3]
20
TXD[2]/TXD[2]
19
TXD[1]/TXD[1]
18
TXD[0]/TXD[0]
Pin
Ty p e
I
C1
2
7
RX_CLK
O, Z
B1
94
4
RX_DV
O, Z
D2
3
8
RX_ER
O, Z
Description
GMII and MII Transmit Data. In GMII mode,
TXD[7:0] present the data byte to be trans-
mitted onto the cable in 1000BASE-T mode.
In MII mode, TXD[3:0] present the data nib-
ble to be transmitted onto the cable in
100BASE-TX and 10BASE-T modes.
TXD[7:4] are ignored in these modes, but
should be driven either high or low. These
pins must not float.
TXD[7:0] are synchronous to GTX_CLK, and
synchronous to TX_CLK in 100BASE-TX
and 10BASE-T modes.
Inputs TXD[7:4] should be tied low if not
used (e.g., RGMII mode).
GMII and MII Receive Clock. RX_CLK pro-
vides a 125 MHz clock reference for RX_DV,
RX_ER, and RXD[7:0] in 1000BASE-T
mode, a 25 MHz clock reference in
100BASE-TX mode, and a 2.5 MHz clock
reference in 10BASE-T mode.
TX_TCLK comes from the RX_CLK pins
used in jitter testing. Refer to Register 9 for
jitter test modes.
GMII and MII Receive Data Valid. When
RX_DV is asserted, data received on the
cable is decoded and presented on
RXD[7:0] and RX_ER.
RX_DV is synchronous to RX_CLK.
GMII and MII Receive Error. When RX_ER
and RX_DV are both asserted, the signals
indicate an error symbol is detected on the
cable.
When RX_ER is asserted with RX_DV de-
asserted, a false carrier or carrier extension
symbol is detected on the cable.
RX_ER is synchronous to RX_CLK.
Copyright © 2009 Marvell
March 4, 2009, Advance
Document Classification: Proprietary Information
Doc. No. MV-S105540-00, Rev. --
Page 13
|
|
Share Link: 