datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

78M6612 View Datasheet(PDF) - Maxim Integrated

Part Name
Description
View to exact match
78M6612 Datasheet PDF : 46 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
78M6612 Data Sheet
DS_6612_001
3.2 Connecting 5 V Devices
All digital input pins of the 78M6612 are compatible with external 5 V devices. I/O pins configured as
inputs do not require current-limiting resistors when they are connected to external 5 V devices.
3.3 Temperature Measurement
Measurement of absolute temperature uses the on-chip temperature sensor and applying the following
formula:
T
=
(N (T )
Sn
Nn)
+ Tn
In the above formula, T is the temperature in °C, N(T) is the ADC count at temperature T, Nn is the ADC
count at 25°C, Sn is the sensitivity in LSB/°C and Tn is +25 °C.
3.4 Temperature Compensation
Temperature Coefficients: The internal voltage reference is calibrated during device manufacture.
The temperature coefficients TC1 and TC2 are given as constants that represent typical component
behavior (in µV/°C and µV/°C2, respectively).
Since TC1 and TC2 are given in µV/°C and µV/°C2, respectively, the value of the VREF voltage
(1.195V) has to be taken into account when transitioning to PPM/°C and PPM/°C2. This means
that PPMC = 26.84*TC1/1.195, and PPMC2 = 1374*TC2/1.195).
Temperature Compensation: The CE provides the bandgap temperature to the MPU, which then may
digitally compensate the power outputs for the temperature dependence of VREF.
The MPU, not the CE, is entirely in charge of providing temperature compensation. The MPU applies the
following formula to determine GAIN_ADJ (address 0x12). In this formula TEMP_X is the deviation from
nominal or calibration temperature expressed in multiples of 0.1°C:
GAIN
_
ADJ
= 16385 +
TEMP
_X
214
PPMC
+
TEMP
_
X 2 PPMC2
223
In a power and energy measurement unit, the 78M6612 is not the only component contributing to
temperature dependency. A whole range of components (e.g. current transformers, resistor
dividers, power sources, filter capacitors) will contribute temperature effects. Since the output of
the on-chip temperature sensor is accessible to the MPU, temperature-compensation mechanisms
with great flexibility are possible (e.g. system-wide temperature correction over the entire unit rather than
local to the chip).
22
Rev 2
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]