datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

74HC109U View Datasheet(PDF) - Philips Electronics

Part Name
Description
View to exact match
74HC109U Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
Philips Semiconductors
Dual JK flip-flop with set and reset;
positive-edge trigger
Product specification
74HC/HCT109
FEATURES
J, K inputs for easy D-type flip-flop
Toggle flip-flop or “do nothing” mode
Output capability: standard
ICC category: flip-flops
GENERAL DESCRIPTION
The 74HC/HCT109 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.
The 74HC/HCT109 are dual positive-edge triggered, JK
flip-flops with individual J, K inputs, clock (CP) inputs, set
(SD) and reset (RD) inputs; also complementary Q and Q
outputs.
The set and reset are asynchronous active LOW inputs
and operate independently of the clock input.
The J and K inputs control the state changes of the
flip-flops as described in the mode select function table.
The J and K inputs must be stable one set-up time prior to
the LOW-to-HIGH clock transition for predictable
operation.
The JK design allows operation as a D-type flip-flop by
tying the J and K inputs together.
Schmitt-trigger action in the clock input makes the circuit
highly tolerant to slower clock rise and fall times.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns
SYMBOL
PARAMETER
CONDITIONS
tPHL/ tPLH
fmax
CI
CPD
propagation delay
nCP to nQ, nQ
nSD to nQ, nQ
nRD to nQ, nQ
maximum clock frequency
input capacitance
power dissipation
capacitance per flip-flop
CL = 15 pF;
VCC = 5 V
notes 1 and 2
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where:
fi = input frequency in MHz
fo = output frequency in MHz
(CL × VCC2 × fo) = sum of outputs
CL = output load capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC 1.5 V.
TYPICAL
HC
HCT
UNIT
15
17
12
14
12
15
75
61
3.5
3.5
20
22
ns
ns
ns
MHz
pF
pF
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
1997 Nov 25
2
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]