datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

74AHC1G09GV View Datasheet(PDF) - NXP Semiconductors.

Part Name
Description
View to exact match
74AHC1G09GV
NXP
NXP Semiconductors. NXP
74AHC1G09GV Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
NXP Semiconductors
74AHC1G09
2-input AND gate with open-drain output
Table 7. Static characteristics …continued
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions
VOL
LOW-level
VI = VIH or VIL
output voltage IO = 50 µA; VCC = 2.0 V
IO = 50 µA; VCC = 3.0 V
IO = 50 µA; VCC = 4.5 V
IO = 4.0 mA; VCC = 3.0 V
IO = 8.0 mA; VCC = 4.5 V
II
input leakage VI = 5.5 V or GND;
current
VCC = 0 V to 5.5 V
IOZ
OFF-state
VI = VIH or VIL; VO = VCC or
output current GND; VCC = 5.5 V
ICC
supply current VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
CI
input
capacitance
25 °C
40 °C to +85 °C 40 °C to +125 °C Unit
Min Typ Max Min Max
Min
Max
- 0 0.1
-
0.1
-
0.1 V
- 0 0.1
-
0.1
-
0.1 V
- 0 0.1
-
0.1
-
0.1 V
-
- 0.36
-
0.44
-
0.55 V
-
- 0.36
-
0.44
-
0.55 V
-
- ±0.1
-
±1.0
-
±2.0 µA
-
- ±0.25
±2.5
±10.0 µA
- - 1.0
-
10
-
20 µA
- 1.5 10
-
10
-
10 pF
11. Dynamic characteristics
Table 8. Dynamic characteristics
GND = 0 V; for test circuit see Figure 6.
Symbol Parameter
Conditions
tpd
propagation delay A and B to Y;
see Figure 5
VCC = 3.0 V to 3.6 V
CL = 15 pF
CL = 50 pF
VCC = 4.5 V to 5.5 V
CL = 15 pF
CL = 50 pF
CPD
power dissipation CL = 50 pF; fi = 1 MHz;
capacitance
VI = GND to VCC
25 °C
40 °C to +85 °C 40 °C to +125 °C Unit
Min Typ Max Min Max
Min
Max
[1]
[2]
- 4.6 7.5 1.0
8.5
1.0
9.0 ns
- 6.5 11.0 1.5
12.0
1.5
12.5 ns
[3]
- 3.2 5.5 1.0
6.5
1.0
7.0 ns
- 4.6 7.5 1.5
8.0
1.5
8.5 ns
[4] -
5
-
-
-
-
-
pF
[1] tpd is the same as tPZL and tPLZ.
[2] Typical values are measured at VCC = 3.3 V.
[3] Typical values are measured at VCC = 5.0 V.
[4] CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + (CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CL × VCC2 × fo) = dissipation due to the output if the combination of the pull up voltage and resistance results in VCC at the output.
74AHC1G09_2
Product data sheet
Rev. 02 — 18 December 2007
© NXP B.V. 2007. All rights reserved.
4 of 10
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]