M29F102BB35N1 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

View to exact match

M29F102BB35N1

1 Mbit (64Kb x16, Boot Block) Single Supply Flash Memory

STMicroelectronics 

M29F102BB

MAXIMUM RATINGS

Stressing the device above the rating listed in the

Absolute Maximum Ratings table may cause per-

manent damage to the device. Exposure to Abso-

lute Maximum Rating conditions for extended

periods may affect device reliability. These are

stress ratings only and operation of the device at

these or any other conditions above those indicat-

ed in the Operating sections of this specification is

not implied. Refer also to the STMicroelectronics

SURE Program and other relevant quality docu-

ments.

Table 7. Absolute Maximum Ratings (1)

Symbol

Parameter

Value

Unit

TA

Ambient Operating Temperature

0 to 70

°C

TBIAS

Temperature Under Bias

–50 to 125

°C

TSTG

Storage Temperature

–65 to 150

°C

TLEAD

Lead Temperature during Soldering

(3)

VIO (2)

Input or Output Voltage

–0.6 to 6

V

VCC

Supply Voltage

–0.6 to 6

V

VID

Identification Voltage

–0.6 to 13.5

V

Note: 1. Except for the rating "Operating Temperature Range", stresses above those listed in Table 7., Absolute Maximum Ratings (1) may

cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions

above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating condi-

tions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant qual-

ity documents.

2. Minimum Voltage may undershoot to –2V during transition and for less than 20ns during transitions.

3. Compliant with the JEDEC Std J-STD-020B (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® 7191395 specification,

and the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.

13/24

Share Link: