datasheetbank_Logo     数据手册搜索引擎和 Datasheet免费下载 PDF

24LC014T 查看數據表(PDF) - Microchip Technology

零件编号产品描述 (功能)生产厂家
24LC014T I2C? Serial EEPROM Family Data Sheet Microchip
Microchip Technology Microchip
24LC014T Datasheet PDF : 42 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
5.6 Device Addressing For Devices
Without Functional Address Pins
A control byte is the first byte received following the
Start condition from the master device (Figure 5-3).
The control byte begins with a four-bit control code. For
the 24XX, this is set as ‘1010binary for read and write
operations. The next three bits of the control byte are
the block-select bits (B2, B1, B0). They are used by the
master device to select which of the 256-word blocks of
memory are to be accessed. These bits are in effect the
three Most Significant bits of the word address. Note
that B2, B1 and B0 are “don’t care” for the 24XX00, the
24XX01 and 24XX02. B2 and B1 are “don’t care” for
the 24XX04. B2 is “don’t care” for the 24XX08.
The last bit of the control byte defines the operation to
be performed. When set to ‘1’, a read operation is
selected. When set to ‘0’ a write operation is selected.
Following the Start condition, the 24XX monitors the
SDA bus. Upon receiving a ‘1010code, the block
select bits and the R/W bit, the slave device outputs an
Acknowledge signal on the SDA line. The address byte
follows the acknowledge.
Control Byte
Address Byte
24XX00 S 1 0 1 0 x x x R/W ACK
24XX01 S 1 0 1 0 x x x R/W ACK
24XX02 S 1 0 1 0 x x x R/W ACK
24XX04 S 1 0 1 0 x x B0 R/W ACK
24XX08 S 1 0 1 0 x B1 B0 R/W ACK
24XX016 S 1 0 1 0 B2 B1 B0 R/W ACK
x xx
x A6 .
A7 . .
A7 . .
A7 . .
A7 . .
Start bit
x = “don’t care” bit
Control Code
Block Select bits
Read/Write bit (read = 1, write = 0)
x A3 .
. A0
. A0
. A0
. A0
. A0
. A0
© 2007 Microchip Technology Inc.
DS21930B-page 13
Direct download click here


Share Link : 

All Rights Reserved © 2014 - 2019 [ 隐私政策 ]