02-09-5102 View Datasheet(PDF) - Molex Connectors
Part Name
Description
View to exact match
02-09-5102 Datasheet PDF : 6 Pages
| |||
Mini-Mac Applicator for Standard .093" Pin and Socket Crimp Terminal
NOTES
1. Molex recommends an extra perishable tooling kit be maintained at your facility.
2. Verify tooling alignment by manually cycling the press and applicator before crimping under power. Check that all
screws are tight.
3. Slugs, terminals, dirt, and oil should be kept clear of work area.
4. Wear safety glasses at all times.
5. For recommended maintenance refer to the Mini-Mac Manual.
CAUTION: This applicator should only be used in a press with a shut height of 135.80mm (5.346”). Tooling
damage could result at a lower setting.
CAUTION: To prevent injury, never operate this applicator without the guards supplied with the press or wire-
processing machine in place. Reference the press or wire processing manufacturer’s instruction manual.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
Contact Information
For more information on Molex application tooling please contact Molex at 1-800-786-6539.
Visit our Web site at http://www.molex.com
Doc No.ATS-638927300
Revision: C
Release Date: 02-16-07
Revision Date: 05-14-12
UNCONTROLLED COPY
Page 6 of 6
|
|
Share Link: 