datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

1-100085-04 View Datasheet(PDF) - Unspecified

Part Name
Description
View to exact match
1-100085-04
ETC
Unspecified ETC
1-100085-04 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Datasheet SHT1x (SHT10, SHT11, SHT15)
Humidity and Temperature Sensor IC
Fully calibrated
Digital output
Low power consumption
Excellent long term stability
SMD type package – reflow solderable
Product Summary
SHT1x (including SHT10, SHT11 and SHT15) is
Sensirion’s family of surface mountable relative humidity
and temperature sensors. The sensors integrate sensor
elements plus signal processing on a tiny foot print and
provide a fully calibrated digital output. A unique
capacitive sensor element is used for measuring relative
humidity while temperature is measured by a band-gap
sensor. The applied CMOSens® technology guarantees
excellent reliability and long term stability. Both sensors
are seamlessly coupled to a 14bit analog to digital
converter and a serial interface circuit. This results in
superior signal quality, a fast response time and
insensitivity to external disturbances (EMC).
Dimensions
1.5 ±0.2 2.0 ±0.1 1.5 ±0.1 sensor opening 2.5 ±0.1
NC
NC
1
NC
2
A5Z
NC
3
NC
11 4
NC
3.3 ±0.1
4.93 ±0.05
2.6 MAX
0.8 ±0.1
Figure 1: Drawing of SHT1x sensor packaging, dimensions in
mm (1mm = 0.039inch). Sensor label gives “11” for SHT11 as
an example. Contacts are assigned as follows: 1:GND, 2:DATA,
3:SCK, 4:VDD.
Each SHT1x is individually calibrated in a precision
humidity chamber. The calibration coefficients are
programmed into an OTP memory on the chip. These
coefficients are used to internally calibrate the signals
from the sensors. The 2-wire serial interface and internal
voltage regulation allows for easy and fast system
integration. The tiny size and low power consumption
makes SHT1x the ultimate choice for even the most
demanding applications.
SHT1x is supplied in a surface-mountable LCC (Leadless
Chip Carrier) which is approved for standard reflow
soldering processes. The same sensor is also available
with pins (SHT7x) or on flex print (SHTA1).
Sensor Chip
SHT1x V4 – for which this datasheet applies – features a
version 4 Silicon sensor chip. Besides the humidity and
temperature sensors the chip contains an amplifier, A/D
converter, OTP memory and a digital interface. V4 sensors
can be identified by the alpha-numeric traceability code on
the sensor cap – see example “A5Z” code on Figure 1.
Material Contents
While the sensor is made of a CMOS chip the sensor
housing consists of an LCP cap with epoxy glob top on an
FR4 substrate. The device is fully RoHS and WEEE
compliant, thus it is free of Pb, Cd, Hg, Cr(6+), PBB and
PBDE.
Evaluation Kits
For sensor trial measurements, for qualification of the
sensor or even experimental application (data logging) of
the sensor there is an evaluation kit EK-H4 available
including SHT71 (same sensor chip as SHT1x) and 4
sensor channels, hard and software to interface with a
computer. For other evaluation kits please check
www.sensirion.com/humidity.
www.sensirion.com
Version 5 – December 2011
1/12
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]