datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

LMH0303SQX/NOPB View Datasheet(PDF) - Texas Instruments

Part NameDescriptionManufacturer
LMH0303SQX/NOPB 3-Gbps HD/SD SDI Cable Driver With Cable Detect TI
Texas Instruments TI
LMH0303SQX/NOPB Datasheet PDF : 27 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LMH0303
SNLS285H – APRIL 2008 – REVISED MAY 2016
LMH0303 3-Gbps HD/SD SDI Cable Driver With Cable Detect
1 Features
1 Supports ST 424 (3G), 292 (HD), and 259 (SD)
• Data Rates up to 2.97 Gbps
• Supports DVB-ASI at 270 Mbps
• Cable Detect on Output
• Loss of Signal Detect at Input
• Output Driver Power-Down Control
• Typical Power Consumption: 130 mW in SD Mode
and 155 mW in HD Mode
• Typical Power Consumption of the Power-Save
Mode: 4 mW
• Single 3.3-V Supply Operation
• 75-Single-Ended Outputs
• 100-Differential Input
• Selectable Slew Rate
• Industrial Temperature Range: 40°C to 85°C
• 16-Pin WQFN Package
• Footprint Compatible With the LMH0302
2 Applications
• ST 424, ST 292, ST 344, and ST 259 Serial
Digital Interfaces
• Digital Video Routers and Switches
• Distribution Amplifiers
3 Description
The LMH0303 device is designed for use in ST 424,
ST 292, ST 344, and ST 259 serial digital video
applications. The LMH0303 drives 75-transmission
lines (Belden 1694A, Belden 8281, or equivalent) at
data rates up to 2.97 Gbps.
The LMH0303 includes intelligent sensing capabilities
to improve system diagnostics. The cable detect
feature senses near-end termination to determine if a
cable is correctly attached to the output BNC. Input
loss of signal (LOS) detects the presence of a valid
signal at the input of the cable driver. These sensing
features may be used to alert the user of a system
fault and activate a deep power-save mode, reducing
the power consumption of the cable driver to 4 mW.
These features are accessible through an SMBus
interface.
The LMH0303 provides two selectable slew rates for
ST 259 and ST 424 or 292. The output amplitude is
adjustable ±10% in 5-mV steps through the SMBus.
The LMH0303 is powered from a single 3.3-V supply.
Power consumption is typically 130 mW in SD mode
and 155 mW in HD mode. The LMH0303 is available
in a 16-pin WQFN package.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LMH0303
WQFN (16)
4.00 mm × 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
SDI In
Typical Application Schematic
SD/HD
LMH0356
3G/HD/SD
SDI Reclocker
ENABLE
SDI
Clock or
Second
Data Output
LMH0303
3G/HD/SD
SDI Cable Driver
SDI Out
FAULT
SDA SCL
SMBus
Data
SMBus
Clock
Microcontroller
or
FPGA
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Direct download click here

 

Share Link : 

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]