datasheetbank_Logo   Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name :   

U1602A View Datasheet(PDF) - HP => Agilent Technologies

Part NameDescriptionManufacturer
U1602A Handheld Digital Oscilloscopes HP
HP => Agilent Technologies HP
U1602A Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
SCOPE SPECIFICATIONS[1]
Vertical System: Scope Channels
Bandwidth (–3 dB)
U1602A/U1602B: DC to 20 MHz
U1604A/U1604B: DC to 40 MHz
DC vertical gain accuracy
5 mV/div to 20 mV/div: ± 5% full scale
50 mV/div to 100 V/div: ± 3% full scale
Scope Channel Triggering
Trigger sensitivity
DC to 5 MHz: 0.8 divisions
U1602A/U1602B: 5 MHz to 20 MHz – 1 division
U1604A/U1604B: 5 MHz to 40 MHz – 1 division
SCOPE CHARACTERISTICS[2]
Acquisition: Scope Channels
Maximum sample rate
Equivalent sample rate
Vertical resolution
Maximum recording length:
Peak detection
Average
100 MSa/s per channel (50 s/div to 250 ns/div)3
200 MSa/s single channel and interleaved (125 ns/div)4
U1604A/U1604B: 2.5 GSa/s (125 ns/div to 10 ns/div)
8 bits
U1602A/U1604A: Up to 11 100 points, viewable on screen with zoom function
U1602B/U1604B: Up to 125 000 points, viewable on screen with zoom function
5 ns
Selectable in average number of 2, 4, 8, 16, 32, 64, 128, 256
Vertical System: Scope Channels
Analog channels
Bandwidth (–3 dB)
AC coupled
Rise time
Single shot bandwidth
Vertical sensitivity
Maximum input
Offset/Dynamic range
Input impedance
Coupling
Channel 1 and Channel 2 simultaneous acquisition
U1602A/U1602B: DC to 20 MHz
U1604A/U1604B: DC to 40 MHz
< 10 Hz without probe
< 1 Hz with 10 MW 10:1 probe
U1602A/U1602B: < 17.5 ns
U1604A/U1604B: < 8.8 ns
U1602A/U1602B: 20 MHz
U1604A/U1604B: 40 MHz
5 mV/div to 100 V/div (1:1 scope probe)
50 mV/div to 1 kV/div (10:1 scope probe)
500 mV/div to 10 kV/div (100:1 scope probe)
CAT III 300 Vrms (up to 400 Hz) from terminal to ground
± 5 div
1 MW I I < 20 pF
AC, DC, GND
[1] All specifications are warranted. Specifications are valid after a 30-minute warm-up period and within a range of ±10 ºC from
firmware calibration temperature.
[2] All characteristics are typical performance values and are not warranted. Characteristics are valid after a 30-minute warm-up
period and within a range of ±10 ºC from firmware calibration temperature.
[3] Maximum sampling rates are shown here. Sampling rate will vary according to selected time base. For more information, please refer
to User’s and Service Guide.
[4] 200 MS/s sampling rate is only available at 125 ns/div timebase
[5] Number of points displayed will vary according to time base selected. For more information, refer to User’s and Service Guide
4
Direct download click here
 

Share Link : HP
All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]