datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ML1001-3U View Datasheet(PDF) - Minilogic Device Corporation Limited

Part Name
Description
View to exact match
ML1001-3U
MINILOGIC
Minilogic Device Corporation Limited MINILOGIC
ML1001-3U Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ML1001
ML1001 Series Static LCD COG Driver
Application
Instrument LCD Module
Telephone LCD Module
Automotive LCD Module
Handheld Device LCD Module
Features
AGold Bump Chip without external component.
Logic & LCD power supply: 2.0V to 6.0V
Typical Current consumption: 25uA at VIN = 3V & no load
condition.
Number of segments: 40
Cascade the ML1001 to form a single piece of 80 or 120
segments LCD driver.
Simple3pinmicrocontrollerinterfacethroughDIN, DCLK & LOAD.
Blink of the display data.
Offer best contrast and widest viewing angle of TN LCD technology.
No temperature compensation needed for Topr = -40oC to 80oC.
General Description
ML1001 static LCD COG (chip on glass) driver is 40 segments LCD driver with gold bump. It can be
cascaded to form a single piece of 80 or 120 segments LCD drivers. It targets at custom TN LCD COG
Module product which requires the best quality of TN LCD technology. With the use of ML1001 series
driver, it offers the best contrast, the widest viewing angle, the widest range of operating voltage and the
widest range of operating temperature when compared to the multiplex method.
Our ML1001 includes an internal 32kHz oscillator, a 40-bit shift register, a 40-bit data register, a 16-bit
segment driver, a 24-bit segment driver, two common drivers, a blink control circuit, a power-up reset
circuit and a frequency divider which offer the necessary clock signals for Blink control, segment &
common driver circuit.
Through the DIN pin, the display data is serially shifted into the 40-bit shift register at the rising edge of
DCLK signal. The display data, which is going to be displayed on the attached LCD, is then stored in the
40-bit data register at the rising edge of the LOAD signal.
Other features like blinking of the display data by the BEN and BCLK, disable the internal oscillator by
the OEN, input an external clock signal to the FIN, and enable or disable the segment and common driver
by the SEN1, SEN2, CEN1A and CEN1B, are included.
Ordering Information
Part Number Description
Package Form
ML1001-1U a 40 segment static LCD driver Gold Bump Die
ML1001-2U a 80 segment static LCD driver Gold Bump Die
ML1001-3U a 120 segment static LCD driver Gold Bump Die
P1/14
Rev. M, Aug 2012
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]