CM6030 View Datasheet(PDF) - HP => Agilent Technologies

Part Name

Description

View to exact match

CM6030

HP Color LaserJet CM6030 and CM6040 MFP Series

HP => Agilent Technologies 

Table 2-11 Jetdirect menus (continued)

Menu item

Sub-menu item

Sub-menu item

DHCP Release

DHCP Renew

IPV6 Settings

Primary DNS

Secondary DNS

Enable

Address

DHCPV6 Policy

Primary DNS

Secondary DNS

Values and Description

Legacy: The address 192.0.0.192 is set, consistent

with older HP Jetdirect devices.

This menu appears if Config Method was set to

DHCP and a DHCP lease for the print server exists.

No (default): The current DHCP lease is saved.

Yes: The current DHCP lease and the leased IP

address are released.

This menu appears if Config Method was set to

DHCP and a DHCP lease for the print server exists.

No (default): The print server does not request to renew

the DHCP lease.

Yes: The print server requests to renew the current

DHCP lease.

Specify the IP address (n.n.n.n) of a Primary DNS

Server.

Specify the IP address (n.n.n.n) of a Secondary

Domain Name System (DNS) Server.

Use this item to enable or disable IPv6 operation on the

print server.

Off: IPv6 is disabled.

On (default): IPv6 is enabled.

Manual Settings: Use this item to manually set IPv6

addresses on the print server.

Enable: Select this item and choose On to enable

manual configuration, or Off to disable manual

configuration.

Address: Use this item to type a 32 hexadecimal digit

IPv6 node address that uses the colon hexadecimal

syntax.

Router Specified: The stateful auto-configuration

method to be used by the print server is determined by

a router. The router specifies whether the print server

obtains its address, its configuration information, or

both from a DHCPv6 server.

Router Unavailable: If a router is not available, the print

server should attempt to obtain its stateful

configuration from a DHCPv6 server.

Always: Whether or not a router is available, the print

server always attempts to obtain its stateful

configuration from a DHCPv6 server.

Use this item to specify an IPv6 address for a primary

DNS server that the print server should use.

Use this item to specify an IPv6 address for a

secondary DNS server that the print server should use.

32 Chapter 2 Control panel

ENWW

Share Link: