datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

Z7H800-RT-10 View Datasheet(PDF) - Superworld Electronics

Part Name
Description
View to exact match
Z7H800-RT-10
SUPERWORLD
Superworld Electronics SUPERWORLD
Z7H800-RT-10 Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
FERRITE CHIP BEADS
Z7 SERIES
8. RELIABILITY & TEST CONDITION :
ITEM
PERFORMANCE
Electrical Characteristics Test
Impedance
DC Resistance
Rated Current
Temperature Rise Test
Refer to standard electrical characteristics list
30°C max. (ǻt)
Solder Heat Resistance
Solderability
Terminal Strength
Appearance : No significant abnormality
Impedance change : Within ±30%
No mechanical damage
Remaining terminal electrode : 70% min.
Preheating Dipping Natural
260°C
cooling
150°C
60
seconds
10±0.5
seconds
More than 90% of the terminal electrode
should be covered with solder.
Preheating Dipping Natural
245°C
cooling
150°C
60
seconds
4±1.0
seconds
The terminal electrode & the dielectric must
not be damaged by the forces applied on the
right conditions.
W
W
TEST CONDITION
HP4291A, HP4287A+16092A
HP4338B
1. Applied the allowed DC current.
2. Temperature measured by digital surface thermometer.
Preheat : 150°C, 60sec.
Solder : Sn-Ag3.0-Cu0.5
Solder Temperature : 260±5°C
Flux for lead free : rosin
Dip Time : 10±0.5sec.
Preheat : 150°C, 60sec.
Solder : Sn-Ag3.0-Cu0.5
Solder Temperature : 245±5°C
Flux for lead free : rosin
Dip Time : 4±1sec.
For Z Series :
Size Force (Kfg)
1
0.2
2
0.5
3
0.6
4
1.0
5
1.0
6
1.0
7
1.5
8
2.0
Time (sec)
> 25
Flexture Strength
The terminal electrode & the dielectric must
not be damaged by the forces applied on the
right conditions.
20(.787)
Solder a chip on a test substrate, bend the substrate
by 2mm (0.079in) and return.
45(1.772) 45(1.772)
Bending
40(1.575)
100(3.937)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
04.07.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]