Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

V6118 View Datasheet(PDF) - EM Microelectronic - MARIN SA

Part Name
EM Microelectronic - MARIN SA EMMICRO
V6118 Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
2, 4 and 8 Mutiplex LCD Driver
The V6118 is a universal low multiplex LCD driver. The
version V6118 2 drives two ways multiplex (two
blackplanes) LCD, the version V6118 4, four way
multiplex LCD , and the V6118 8, eight way multiplex
LCD. The display refresh is handled on chip via a 40 x 8
bit RAM which holds the LCD content driven by the driver.
LCD pixels (or segments) are addressed on a one to one
basis with the 40 x 8 bit RAM (a set bit corresponds to an
activated LCD pixel). The V6118 has very low dynamic
current consumption , 150 µA max., making it particularly
attractive for portable and battery powered applications.
The wide operating range on both the logic (VDD) and the
LCD (VLCD) supply voltages offers much application
flexibility. The LCD bias generation is internal. The voltage
bias levels can also be provided externally for applications
having large pixels sizes. The V6118 can be used as a
column only driver for cascading in large display
applications. In the column only mode, 40 column outputs
are available to address the display. A BLANK function is
provided to blank the LCD, useful at power up to hold the
display blank until the microprocessor has updated the
display RAM.
Balances and scales
Automotive displays
Utility meters
Large displays (public information panel etc.)
Portable, battery operated products
V6118 2 is 2 way multiplex with 2 rows and 38 columns
V6118 4 is 4 way multiplex with 4 rows and 36 columns
V6118 8 is 8 way multiplex with 8 rows and 32 columns
Low dynamic current, 150 µA max.
Low standby current, 1 µA max. at +25°C
Voltage bias and mux signal generation on chip
Display refresh on chip, 40 x 8 RAM for display storage
Display RAM addressable as 8, 40 bits words
Column driver only mode to have 40 column outputs
Crossfree cascadable for large LCD applications
Separate logic and LCD supply voltage pins
Wide power supply range: VDD: 2 to 6V, VLCD: 2 to 8V
BLANK function for LCD blanking on power up etc.
Voltage bias inputs for applications with large pixel
Bit mapped
Serial input / output
Very low external component count
-40 to + 85 °C temperature range
No busy states
LCD updating synchronized to the LCD refresh signal
QFP52 and TAB packages
Typical Operating Configuration
Pad Assignment
Fig. 1
Copyright © 2004, EM Microelectronic-Marin SA
Fig. 2

Share Link: [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]