datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

ADXL05AH View Datasheet(PDF) - Analog Devices

Part Name
Description
View to exact match
ADXL05AH Datasheet PDF : 20 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADXL05
ABSOLUTE MAXIMUM RATINGS*
Acceleration (Any Axis, Unpowered for 0.5 ms) . . . . . . 1000 g
Acceleration (Any Axis, Powered for 0.5 ms) . . . . . . . . . . 500 g
+VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7.0 V
Output Short Circuit Duration
(VPR, VOUT, VREF Terminals to Common) . . . . . . . Indefinite
Operating Temperature . . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . –65°C to +150°C
*Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only; the functional
operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Package Characteristics
Package
JA
10-Pin TO-100 130°C/W
JC
30°C/W
Device Weight
5 Grams
ORDERING GUIDE
Model
Temperature Range
ADXL05JH
ADXL05AH
0°C to +70°C
–40°C to +85°C
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADXL05 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
Drops onto hard surfaces can cause shocks of greater than 1000 g
and exceed the absolute maximum rating of the device. Care
should be exercised in handling to avoid damage.
WARNING!
ESD SENSITIVE DEVICE
PIN DESCRIPTION
+5 V
C2
C1
COM
VREF
ST
VPR
VOUT
VIN–
The power supply input pin.
Connection for an external bypass capacitor (nominally 0.022 µF)
used to prevent oscillator switching noise from interfering with
other ADXL05 circuitry. Please see the section on component
selection.
Connections for the demodulator capacitor, nominally 0.022 µF.
See the section on component selection for application information.
The power supply common (or “ground”) connection.
Output of the internal 3.4 V voltage reference.
The digital self-test input. It is both CMOS and TTL compatible.
The ADXL05 preamplifier output providing an output voltage of
200 mV per g of acceleration.
Output of the buffer amplifier.
The inverting input of the uncommitted buffer amplifier.
CONNECTION DIAGRAM
10-Header (TO-100)
TOP VIEW
VREF
66
COM
5
C2
4
ST
7
C1
3
88
VPR
9
VOUT
2
C1
1
10
+5V
VIN–
NOTES:
AXIS OF SENSITIVITY IS ALONG A LINE
BETWEEN PIN 5 AND THE TAB.
THE CASE OF THE METAL CAN
PACKAGE IS CONNECTED TO PIN 5
(COMMON).
ARROW INDICATES DIRECTION OF
POSITIVE ACCELERATION ALONG AXIS
OF SENSITIVITY.
–4–
REV. B
 

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]